capitalv
New Member
I bought a 05 Liberty Limited and the dealer gave me one key. I went to my local Jeep dealer and bought a key and they programmed it for $150. The new key starts the car but when the car is locked and I use the key to unlock the drivers door it sets off the alarm. Since then I bought a 3rd key with the remote on Ebay and had it cut. According to the manual I can program a key if I have 2 good keys. After goin through the sequence when the second key is installed and turned to the on position, after 10 seconds or so the light in the dash is supposed to blink and it doesn't. I also looked in the manual and the original zip lock bag that the original keys came in was in there and it has some numbers on the bag. Could these numbers be useful for the dealer to get the correct program for the key. I assume that the key that I had programmed at the dealer is not the correct code since it sets off the alarm when I unlock the vehicle. Any help would be appreciated.