Latest activity
-
blackhawk replied to the thread P0765 Shift Solenoid "B"question..Engine, model, year? -
NAll dry, still look rough but with the pitting that's not a surprise, the bores are still slightly greasy so hopefully the overspray...
-
NWifey had major surgey and is recovering well, so finally had some time to work on Bert in between wound care and drain purges (gross...
-
NBeen spraying some Lanolin based rust prevention on the inner wings, inside and out ready for next winters salt so I've had the battery...
-
NYesterday I pressure washed Giddyups underside to prevent as much dirt as possible from falling into my eyes as I dropped her fuel tank...
-
TMy Kk does the same thing. You do not have the u connect module installed. It was an option though the radio still has the buttons for...
-
Kkellogs replied to the thread TPMS EVIC confusion.So, is there any way to get individual PSI values displayed for the basic system somehow?
-
Couldn't find an original clutch out of the 5 Liberty's I saw, so I grabbed this UAC Korea compressor that looks to have been installed... -
Aatikovi replied to the thread Suggestions for A/C clutch?.Couldn't find an original clutch out of the 5 Liberty's I saw, so I grabbed this UAC Korea compressor that looks to have been installed...
-
-
DadOSix replied to the thread Suggestions for A/C clutch?.Maybe one of the shims got mislaid and the new plate did not have the correct air-gap. I lost one real thin one on my 06 and had to...
-
DadOSix reacted to duderz7's post in the thread Rear upper control arm wont go in all the way with
Like.
Remove bracket from axle, insert ball joint, reattach bracket to axle. -
Ffastmerc posted the thread KL question- Max Size Mud/Snow..... 2019 Cherokee Limited.... in KK General Discussion.Greetings! KJ RIP! Saga continues..... New to daughter 2019 Cherokee Limited. She's in Co Springs are and seems insistent on...
-
Ffastmerc replied to the thread 2008 3.7L Questions Jeep Newbie Daughter's truck down.....!.Say a prayer for this Jeep. Not going to make the resuscitation!!! Should hit a recycler in the Co Springs area soon......nice...
-
HHULL_IN_KK replied to the thread 3/8" Leveling Spacer?.Sounds good. I'll probably replace the struts up front and see where that gets me first. Don't need a ton of clearance where I reside...
-
HI've got H&R springs with the weight of the 2.8 Diesel it needed the spacers to give it 20" on a V6 you should get 1 1/2" Mine is a KJ...
