Latest activity
-
KJowner replied to the thread 3/8" Leveling Spacer?.I've got H&R springs with the weight of the 2.8 Diesel it needed the spacers to give it 20" on a V6 you should get 1 1/2" Mine is a KJ... -
Thanks for the reply. I had read this, even some installing new springs and shocks and being satisfied with the height of the front even...
-
HHULL_IN_KK replied to the thread 3/8" Leveling Spacer?.Thanks for the reply. I had read this, even some installing new springs and shocks and being satisfied with the height of the front even...
-
u2slow reacted to duderz7's post in the thread Rear upper control arm wont go in all the way with
Like.
Remove bracket from axle, insert ball joint, reattach bracket to axle. -
My Kk does the same thing. You do not have the u connect module installed. It was an option though the radio still has the buttons for...
-
KJowner replied to the thread 3/8" Leveling Spacer?.Yes, I have a pair of 1/4" fitted, the give around 1/2" lift..... however they aren't going to fix shot springs, if you have a low front...
-
KJowner replied to the thread Rear upper control arm wont go in all the way.I vaguely remember using a couple of jacks to adjust the diff angle and lift it slightly so it slid in.
-
Hi. I live in south of France with CRD 2.8L from 2006. I replaced the glow plug with 7V 2 years ago but it was a mistake. 2 of them get...
-
HHULL_IN_KK replied to the thread Hands free use.My Kk does the same thing. You do not have the u connect module installed. It was an option though the radio still has the buttons for...
-
HHas anyone installed the thinner spacers meant to just level the front end? I would like to just level the jeep.
-
-
DDr. Pluh replied to the thread Rear upper control arm wont go in all the way.I ended up hammering the bolt in, it went in relatively easily and the thread was only lightly damaged so i could screw the nut on...
-
duderz7 replied to the thread Rear upper control arm wont go in all the way.Remove bracket from axle, insert ball joint, reattach bracket to axle.
