Latest activity
-
Did it myself, I got close, I didn't have extra pinion bearings on hand to make a set up bearings. I had assumed we had the pinion depth... -
LLibertyDuck replied to the thread Front Lower control arm and steering knuckle modification.Yes I did, I got ball joint with grease nipple on side.
-
I would stay away from Napa Calipers due to a sloppy fitment. Shop found Raybestos Front New Calipers & fit perfectly !! Back on the...
-
LLibertyDuck replied to the thread Front Lower control arm and steering knuckle modification.Shoot! My jeep is 2005 which is KK. I agreed that it won't fit. I can do research and see the difference. Chrysler did poor job on...
-
On a trip away from home, when suddenly the left front caliper slowly seized up with a smoke show. Not a good day. For every thing...
-
Hi everyone! I'm new to forum and I own 2005 jeep Liberty Limited 3.7l. Looking forward to have questions and help. good luck to all -
ikuo78 replied to the thread Engine/Crankcase Breathers.I am trying to do this to lower the pressure inside the crankcase. The breather hose connected upstream of the throttle is basically... -
lfhoward reacted to Johnny O's post in the thread Bert is in my driveway...won't start... with
Like.
Dang kids never listen. I told them Bert (2007 KJ 3.7L) was old and tired and deserved to be taken care of and only used around town... -
lfhoward replied to the thread Front Lower control arm and steering knuckle modification.Jeep changed the design in 2008 for the KK Liberty. It's just the way you think it should be. Unfortunately I don't think KK knuckles...
-
u2slow replied to the thread Front Lower control arm and steering knuckle modification.I'm not much of a brand follower. If the one you're using is failing, try a different one. -
LLibertyDuck replied to the thread Front Lower control arm and steering knuckle modification.Yes, I did on first one and it failed year later. Replaced with another brand, so far good. I thought moog was good brand but appeared...
-
u2slow replied to the thread Front Lower control arm and steering knuckle modification.I would try other joints also. I'm still on original lowers.
-
blackhawk replied to the thread Front Lower control arm and steering knuckle modification.Have you tried with moog ball joints? -
TI think it’s more than the just the radio. You may also need a steering wheel with audio control buttons and a microphone to have hands...
