Latest activity
-
EEthan05 replied to the thread Shock Recommendations.Alright. Another thing is the duralast shocks had the bottom mount too thin and washers didn’t seem to hep and I didn’t want to have the...
-
u2slow replied to the thread 4.10 Re-gearing - 2025.Consider saving the shop a step and take the front diff out yourself. If they are unfamiliar with the KJ, the loose part on the bench... -
u2slow replied to the thread How rare or desirable are the 5-speeds?.Maybe 5-10% of them were manual back when we were shopping for 02-07 KJs in 2012. Seems like anything with a manual trans is more...
-
u2slow replied to the thread What brand clutch kit to use?.Yes pilot bearing. Get the version with the whole outer 'puck' included. It's easier to install without damage. I went with an AMS...
-
u2slow replied to the thread Shock Recommendations.Washers are easy to add if the shock eye is narrow.
-
That's way too complicated :waytogo: The bolts that hold the diff to the brackets on both sides are pretty obvious - however the front... -
EEthan05 replied to the thread Shock Recommendations.The ones I had were duralast which seem to not be the best. My main concern is the width of the top and bottom mounts, was there...
-
All dry, still look rough but with the pitting that's not a surprise, the bores are still slightly greasy so hopefully the overspray... -
Gyro replied to the thread What does Trail Rated add to a 2006 Sport?.I think trail rated just means it is 4x4. Most other things are trim level upgrades,Limited,Renegade,Rocky Mountain Edition ect. Gyro -
Mmike reacted to JeepKJ_Guy's post in the thread Newbie Libby Owner…REALLY need alot of help pls with
Like.
I used NGK plugs gaped at .040 and put in new Denso Ignition coils and fixed mine. Youtube Video about changing plugs/coils: After... -
KJowner replied to the thread What did you do to your jeep today?.All dry, still look rough but with the pitting that's not a surprise, the bores are still slightly greasy so hopefully the overspray... -
-
KJowner replied to the thread Bearing going out?.If the wheel bearings are OK look at the CV joints on the front axle shafts, check the tyre is round and running true as well.
-
KJowner replied to the thread What brand clutch kit to use?.I've never pulled one of them apart but I'd guess it will have a pilot bearing, I haven't ever seen a gearbox that didn't use one to...
-
Front diff definitely has to come out to swap the new gears in. It will feel like a new vehicle once you regear. Mine felt stronger...
-
Thanks! I’ve tried to take care of it over the years. I have done a lot to it myself, but regearing is out of my league.
Latest posts
-
-
Can I get an alignment before rear control arm replacement?- Latest: GitEmSteveDave
-
-
-