bNat
New Member
Been searching for a few days now and can not find any answers to my problem. Recently added the lift listed below to my '06 Sport and initially all was well, or so I thought...Installed the lift in Sept., full alignment and drove great, about a week or two ago walking up to it after work I noticed the driver side front was sagging a bit, asked a buddy if he noticed it as well and he agreed. Drove it home and on level ground did some measurements...Driver side front is 3/4" lower then the passenger side, and the rear is 1/2" lower. As far as I remember they both were even when the lift was first finished. Drives fine still with no noise and straight as an arrow, but before I got to ripping anything apart I thought I would look for some answers. Any input would be great guys!
Lift:
Ironman 1.5" HD kit from Al's (Front shocks had to be exchanged with OME's since he had none in stock...and I wasn't waiting...but full Ironman otherwise)
Top Plates
.5" Clevis Spacer
I will get some pictures and exact measurements up tomorrow hopefully.
Thanks in advance!
Lift:
Ironman 1.5" HD kit from Al's (Front shocks had to be exchanged with OME's since he had none in stock...and I wasn't waiting...but full Ironman otherwise)
Top Plates
.5" Clevis Spacer
I will get some pictures and exact measurements up tomorrow hopefully.
Thanks in advance!