Trail rated emblem

[musky]

i just got a new emblem since mine fell off or was taken off,i used the 3m sticker that came with it and it is crap so i took it off before it falls off what is best to use to stick this emblem on proper.

 

[uss2defiant]

not stick it at all.

3M double sided foam tape should work. did you prep the area before sticking it on?

 

[musky]

yes but that 2 sided tape is no good also when stuck it does not sit flush you can see the white 3 m tape behind it from the top.

 

[tommudd]

Lowes, or any hardware store has two sided very thin tape just for that purpose. I buy it by the 50 foot rolls for use here

 

[Jim McClain]

You don't need no steenking emblem... to show you are trail rated. It's a Jeep! Heck, I even took off the Jeep badging and ever'one still knows it's a Jeep.

 

[rjkj2005]

Make sure you wipe it down with alcohol or other solvent to remove any wax or oils before putting badge on.

Sent from my XT1585 using Tapatalk

 

[musky]

i think im going to try this.

https://www.walmart.com/ip/3M-Plastic-Emblem-and-Trim-Adhesive-1-oz/16913676

 

[tommudd]

i think im going to try this.

https://www.walmart.com/ip/3M-Plastic-Emblem-and-Trim-Adhesive-1-oz/16913676

No , buy the 2 sided tape that is made for installing emblems etc , do not use that glue