lower rad hose clamps

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RenKJ

Full Access Member
Joined
Feb 19, 2015
Messages
326
Reaction score
15
Location
Canada
anyone able to advise which of these clamps would be for the lower rad hose on a 2006?


mopar is telling me a worm gear clamp is correct for my ride, but my current clamps are constant tension
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,081
Reaction score
1,747
Location
B.C. Canada
The problem is the OE clamps are no longer available, which is why they mention worm gear clamps.
If you can re-use the original factory clamps again, that would be the best solution.
Keep in mind there is a cable type tool for removing those clamps. I'm sure some have used channel lock pliers to remove the OE's tho.
Would also be a good time to have the new Mopar thermostat & lower rad hose in hand as well.
 

Attachments

  • Lower Rad Hose New.jpg
    Lower Rad Hose New.jpg
    315.2 KB · Views: 9
  • Lower Rad Hose Clamps.jpg
    Lower Rad Hose Clamps.jpg
    519.3 KB · Views: 9
  • Thermostat KJ.jpg
    Thermostat KJ.jpg
    389.5 KB · Views: 9

kejobe

Full Access Member
Joined
Sep 5, 2016
Messages
415
Reaction score
62
Location
NE Ohio
I just use the worm gear clamps from Home Depot. They’re stainless and I’ve never had an issue with them on anything.
 

Latest posts

Members online

Top