Jeep Liberty 2002 parting out and need gone

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JoeyG23832

New Member
Joined
Jul 5, 2016
Messages
1
Reaction score
0
Location
Richmond VA
Anybody need parts for an 02 liberty? I picked it up for a few parts i needed since it was cheap and wrecked. drive train is in good shape. lot of highway miles but starts and drive great. let me know if yall need something. thanks. my zip 23832 VA

Joey
 

FIRE74

New Member
Joined
Feb 19, 2015
Messages
5
Reaction score
0
Location
St.Leonard, MD
I need the rear speed sensor/abs wire and connector that plugs into the the abs sensor on top of the rear diff, and also the engine fan relay (I can send a pic if needed) Thanks!
 

JasonJ

Full Access Member
Joined
Jul 8, 2013
Messages
1,521
Reaction score
51
Location
Michigan
front left (drivers door) latch/motor. The one that moves the lock rod up and down. Mine is all borked and makes grinding/squealing noises.

Also, the plastic kick panel that goes around the hood release lever.
 

mindbomb

Full Access Member
Joined
Mar 29, 2016
Messages
380
Reaction score
0
Location
California
Is it limited model? If so I want the leather seats ;)


Sent from my iPhone using Tapatalk
 

drewwenmoth

Full Access Member
Joined
Sep 13, 2014
Messages
49
Reaction score
0
Location
Akron ohio
Does it have factory towing? I need the electric fan and shroud


Sent from my iPhone using Tapatalk
 

HerronScott

Full Access Member
Joined
Apr 4, 2016
Messages
76
Reaction score
0
Location
Staunton, VA
If a Limited, I need the silver part that goes around the door lock on the rear driver side door. Also a rear cargo cover (needs to go with taupe interior).

Scott
 

Logan Savage

Full Access Member
Joined
Aug 14, 2015
Messages
245
Reaction score
0
Location
WV
I'd like to have the engine if it runs well but you're a little far from me . How many miles are a lot ?
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,099
Reaction score
1,766
Location
B.C. Canada
Ya and some photos of the KJ should be a necessity! :icon_rolleyes:
 

RobKlinky

New Member
Joined
Jun 23, 2016
Messages
18
Reaction score
0
Location
Detroit
I could use the connector that plugs into the cooling fan with about 6" of wire. But only if it's the 3-pin kind.
 

JasonJ

Full Access Member
Joined
Jul 8, 2013
Messages
1,521
Reaction score
51
Location
Michigan
I could use the connector that plugs into the cooling fan with about 6" of wire. But only if it's the 3-pin kind.

Two months later and no replies, not sure we'll be seeing a response from the OP,Rob.
 
Top