Trodo
Full Access Member
Okay, so I was changing the oil, and just wasn't up to contorting around the front skid plate to get the filter, when I noticed some rust, around and on the front suspension plates, right above the half-moon cut out, in between the LBJ and UBJ. (which looked okay, btw)
Just inside the wheel well /fender wall. Hard to spot, you'll need a light.
There should not be rust there, so I scrubed with a wire brush and soaked it with the rustolem.
I suggest everyone crank the wheel over and check this area for rust on both sides, especially in colder climate areas.
Just a heads up.
Just inside the wheel well /fender wall. Hard to spot, you'll need a light.
There should not be rust there, so I scrubed with a wire brush and soaked it with the rustolem.
I suggest everyone crank the wheel over and check this area for rust on both sides, especially in colder climate areas.
Just a heads up.