ESP/BAS, Traction Control, ABS lights on

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kinshinchi

New Member
Joined
May 4, 2015
Messages
2
Reaction score
0
Location
Houston
Lately on my Jeep Liberty 2010 has this issue where if I hit a lot break during rush hours (sorry its houston and traffic is bad), all 3 lights will come on but when I get home turn off my engine and turn it back on, those 3 lights will be off. I am not its because bad break? when I hit break i do hear noise and that will cause the issue? or its bad sensor? Any insight thought will be appreciate.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
First thing I would check would be the " brakes"
KKs goes through them pretty quick with the ABS and all it seems
While there check all wiring to the sensors
also go to ****zone and they can pull the exact codes for you
 

twowings

Full Access Member
Joined
Nov 23, 2014
Messages
802
Reaction score
3
Location
Tulsa, OK
Bad sensor, bad connector(s), damaged component(s), extremely worn brakes....if you are not a DIYer, then get a brake inspection and get the codes....
 
Top