can a new mopar radio install into liberty?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rockymountain

Full Access Member
Joined
Apr 20, 2007
Messages
1,734
Reaction score
27
Location
Spencerville, IN
I've been looking to upgrade my stock RBK to at least the 6 disc changer. I've seen the new 05-06 radios and wonder if the mounting holes are the same. It's hard to tell from pictures. Are the 4 holes for the mounting screws in the same place?
You must be registered for see images


Seems like they are in the same place, but does anyone have the ability to check and see? It is probably not possible, but I was just wondering if any else has thought of doing this.
 

hyde

Moderator
KJ Supporting Member
Joined
Feb 15, 2006
Messages
7,347
Reaction score
7
I think 1,5 DIN vs 2 DIN.
No Go.
+ Harness problems? + Need to fabricate dash accent.
Go aftermarket. $200. ;)`
 

Gentleman

Full Access Member
Joined
May 26, 2005
Messages
406
Reaction score
1
Location
8' Below Sea Level
That radio operates on the CAN bus system, the plugs in the back are the same as previous years, but the wiring is different

Bob
 
Top