Another power seat question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AJ9P

Full Access Member
Joined
Feb 16, 2021
Messages
215
Reaction score
169
Location
Wisconsin
So, I have been trying to figure out how to get power to the power seat track for the drivers seat. I originally had a manual seat. I’ve read the the older threads, looked at the owners manual and the service manual. Form my understanding the blue/red wire is the + wire and it should come from cb 1 on the power distribution panel. I see that the harness has the wire , do I just splice into that with a 20amp add a fuse from a ignition powered fuse? Thanks
 

AJ9P

Full Access Member
Joined
Feb 16, 2021
Messages
215
Reaction score
169
Location
Wisconsin
I found the how thread for this. Thanks to bluphant , I now know I need mopar 56021543. My question is, which slot is cb1? The service manual for the 2006 only shows cb3. Thanks for the help
 
Joined
Jan 31, 2023
Messages
48
Reaction score
17
Location
FRANCE
I found the how thread for this. Thanks to bluphant , I now know I need mopar 56021543. My question is, which slot is cb1? The service manual for the 2006 only shows cb3. Thanks for the help
Did you succeed ? I am working at doing the same on the passager seat, look at the post. The trick is that wire and connector from the Jeep to plug to driver or passenger are different, so we have 2 solutions to find and cant duplicate each other...
 
Top