About 3 weeks ago I got into the car (after having previously driven it with no problem) and turned the key. As it sounded that the engine took I let go the key. It didn't. Since then I have been unable to start it, although it turns over and backfires once or twice.
I have checked the starter motor, battery, fuses and fuel pump and checked fuel flow at the Schraeder valve. I have replaced the camshaft position sensor. I have replaced the spark plugs and checked that there is power to them. My obd2 reader just returns a P0340 error (camshaft sensor).
2 questions:
Do I need to do a relearn procedure after changing the camshaft position sensor?
and
Does anyone have any idea what the problem may be? (I am all out of ideas....)
Many thanks,
Ralph
I have checked the starter motor, battery, fuses and fuel pump and checked fuel flow at the Schraeder valve. I have replaced the camshaft position sensor. I have replaced the spark plugs and checked that there is power to them. My obd2 reader just returns a P0340 error (camshaft sensor).
2 questions:
Do I need to do a relearn procedure after changing the camshaft position sensor?
and
Does anyone have any idea what the problem may be? (I am all out of ideas....)
Many thanks,
Ralph
