Ya I've done that but since my last post I think I've figured out what's wrong. The back end of the blue gasket with the ridge in the middle is the problem. Hard to explain but the length of the gasket between the two back bolts/fasteners , is a millimeter or 3 too long thus not allowing the...
Thanks TD, Okay, that would be one of the sandwiched solutions which I'm trying to avoid having to do if at all possible, but I think I may as well dream on.
2002 automatic liberty 3.7 6 cylinders
I've changed the head gasket and put everything back together, followed by smoke which led me to find oil dripping onto the exhaust on the passenger side landing on the O2 sensor not that that matters.
I removed the valve cover for the second time and I...
I replaced the passengers side (USA) head gasket and i removed the LOWER rail in the process
which now has to be reinstalled.
How can i do that without removing the timing chain cover.
I sense that I can slip the rail over the fully released tensioner but I'm having some doubts as to whether...
I doubt if it needs to be flush, mine isn't, there are about two threads showing above the surface and there's not the slightest bit of moisture.
However, we ho knows if our bleeding valves are the same size or depth, it's a possibility to consider. So if you take it out again it might be no...
I must have missed or I'm getting my posts mixed up. When was there a mention of a radio regard my initial post/ question?
Or are there different posts running into each other
Now it all makes sense. Thanks for the advice and insight to you Mr lava lamp and klc. It's the first forum where I've received straight up, to the point knowledgeable answers.
I really do appreciate it
That makes more sense. So the head is not the ground but rather the head is being ground to the wall.
Is that unusual to have a head that needs grounding.?.
2002 Automatic Jeep Liberty limited 3.7 6 Valve
When I was replacing the head gasket , a grounding strap was attached to the aluminum surface. The last time I checked you don't ground to aluminum.So, what are those two holes for.
Secondly I'm guessing /assuming that the strap gets sandw in ched...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.