Search results

From a Chemist's perspective, there is a clear advantage to using synthetic oil over conventional oil. Conventional oil is manufactured using fractional distillation from mineral oils obtained from the ground. The oils in conventional oil are separated by boiling point and thus, you may get...

Hello, so I've had a Powek Ackoustik PDN 626B double din head unit in my jeep for awhile, but today I opened up the dash in order to mount a switch for my fog lights and when I plugged the radio back in, the screen never turned on. The car will still start, so the radio is still getting power of...

Hello, so I've had a Powek Ackoustik PDN 626B double din head unit in my jeep for awhile, but today I opened up the dash in order to mount a switch for my fog lights and when I plugged the radio back in, the screen never turned on. The car will still start, so the radio is still getting power of...

Just another question- I put in the backup camera and it worked fine for like an hour, but now the screen says no signal every time I put it into reverse. I ended up doing a wired approach because I couldn't get the wireless to work. It is wired into the reverse lights with the screw that holds...

So if I, say tapped into the sunroof fuse (my jeep does not have a sunroof) to get power only when the vehicle is turned on for the receiver and TFT and tapped into the reverse lights for the camera and transmitter, that should be fine without too much wear on the TFT or receiver?

So the transmitter attached to the TFT won't overheat if it's powered all the time?

Will an 02 EVIC work in an 06 liberty? thinking of adding one myself

If I have the factory tow hitch installed, can I tap into the reverse wire from the trailer wiring harness and mount the camera above the hitch? I purchased a wireless setup, so what would be the best way to power the TFT display that displays the feed? I have heard you want it hooked up to the...

Has anyone had experience installing a wireless backup camera? Specifically how to get to the reverse wire from the mounting location at the license plate and how to wire up the TFT mirror so that it only receives power when the vehicle is in reverse. I will be doing this in a 2006 Liberty Sport...