Search results

  1. S

    What did I do wrong with plugs?

    First of all what codes are you getting? If you don't know how to find out, read the thread on how to do so. Second, did you put the washer like rings on the spark plugs before installing? I know some plugs already have them on and others you have to put on yourself. Also, if you remove the two...
  2. S

    Removed the valve cover

    This is this first I've really had it running without the chip. It was running VERY rich on 2, 4, and 6... Rich on 2, richer on 4, and even richer on 6... But with good compression... Removed neg batt cable for about 10 mins to reset the CEL but not a half hour... Why is it a half hour? I...
  3. S

    Removed the valve cover

    Got the oil pressure sender unit in... replaced all the spark plugs with dual fires... added the full synthetic oil... The thing runs like a top... sounds so much smoother, so much quieter, and feels like it has more power... so far, haven't noticed any coolant leaks, but have only driven it...
  4. S

    Removed the valve cover

    Compression test was good before I started everything, I'm pretty sure it's still good now... and now that you mention it, there does seem to be a little smoke coming from where the exhaust pipes mount up to the exhaust manifold... I noticed it today... it is very faint (almost like someone has...
  5. S

    CAI for the Libby

    Here is mine KY
  6. S

    Removed the valve cover

    Thinking about it, I think I'm ruling out the fuel filter as that really doesn't make since as to why it would be running RICH... going to have my buddy check the oil pressure, coolant pressure, and do a vacuum check on it as well... try to rule out everything before throwing sensors at it...
  7. S

    Removed the valve cover

    So here is an update... Removed the other rocker arms (look good)... the other lash adjusters look good (still stiff)... installed new lash adjuster, put everything back together, refilled the coolant (so far, doesn't seem to be leaking anywhere), drove it around for a few miles, no misses, no...
  8. S

    2005 Renegade Fender Flares

    That's prolly what I will do... I haven't really seen any where the fenders are line x'ed and the bumpers are painted... seen plenty like tjkj's (line x, or similiar, around the entire bottom, as well as others with the bumpers and fenders done, but not really just the fenders...
  9. S

    2005 Renegade Fender Flares

    Yeah ill either paint the fronts to match or linex all the flares
  10. S

    CAI for the Libby

    Mine is an 04. I bought it about a year ago also. Lookin at your pic again, you have an electrical box or somethin by your condenser that I don't have in mine. Atleast not in that spot.
  11. S

    CAI for the Libby

    NO... I do have the AEM brute force intake... it has the same exact sticker on it that yours does... it has like a painted silver like finish to it... what year is yours?
  12. S

    CAI for the Libby

    KYLiberty... Yours is a little different then mine... not sure why... your housing is only one sided... my housing completely boxes in the intake with rubber molding around the top lip that sits flush with the hood... I'll get a pic up probably this weekend...
  13. S

    2005 Renegade Fender Flares

    Thank you Tony! If anyone out here has an 05-07 limited... Could you find the part number for the front bumper? The codes are vin number derived unless, someone doesn't mind pm'ing their 05-07 limited vin to me so I can get the part number from the dealer... my 04 is silver... not sure what the...
  14. S

    2005 Renegade Fender Flares

    Here are some part numbers I got for most of the front end pieces Hood 55360667AD Rt Fender Flare 5JR68CD7AH Lft Fender Flare 5JR69CD7AH Rt Fender Liner 551J6790AD Lft Fender Liner 551J6791AD Grille 5JR27ZZZAE Still need to find the header panel/grille support and the front bumper from the...
  15. S

    CAI for the Libby

    I have the aem brute force intake on mine. Ill get a pic up for you when I get my engine back together. I think it is the nicest looking aftermarket intake for the kj
  16. S

    2005 Renegade Fender Flares

    I have been on that site, and I remember the ones that I saw were for the 02-04 model... I'm looking for the 05-07 model... I'd like to put the 2005 renegade pieces on mine... my front end is damaged, so I might as well get what I want... turns out the fenders are the same, but I think I would...
  17. S

    A few minor mechanical problems..

    lmao... lights on the lower control arms... hmm...
  18. S

    A few minor mechanical problems..

    I don't believe on a stock liberty that I have heard anything about the a-arms contacting the springs... also, I'm guessing your front strut could be shot...
  19. S

    2005 Renegade Fender Flares

    I'm trying to find out what the part number is for the 2005 Renegade Fender Flares... These are the part numbers I have... Not sure which corresponds with the Renegade model... 5JH42 TZZAD 5JH43 TZZAD 5JH46 BDLAE 5JH47 BDLAE 5JR68 CD7AG 5JR69 CD7AG 5JR68 CJMAG 5JR69 CJMAG
  20. S

    Got hood vents installed

    Personally I'm wondering how they are going to be with the snow... Having the jeep sit outside all night with it snowing... there are a lot of sensors and crap right below those vents, such as all the wires for the ignition coils... I looked at the marine website, and the holes in those look...

Random media

IMG 1171
3254.jpg
IMG 0220
1407.jpg
IMG 20140621 135347 636
First Trail
IMG 20130309 121939 546
Reinstalled
sunrise near by Wroc?aw

Latest posts

Members online

Total: 395 (members: 4, guests: 391)
Top