Search results

  1. J

    ‘04 abs

    Yep. It didn’t have abs. Needed some work but was a fair price. Then found out it needed a head gasket. That one is a pass.
  2. J

    Brake Bleeding Problems

    Another thing to check would be if you actual bleeder is sealing at the bleeder valve while it’s open. Meaning the parts that attach from the bleeder tool to the actual bleeder valve. All tubing and fittings must be air tight. Sometimes putting some thick grease around the bleeder attachments to...
  3. J

    ‘04 abs

    Do all ‘04’s have antilock brakes? I’m looking at one for my daughter ( I love my ‘02). It needs a front wheel bearings And o2sensor for sure. Not to big a deal. But the brakes feel much softer than mine. The pedal also travels further to the floor than mine. The brakes seem to function ok as...
  4. J

    Nerf bars fit

    I have no idea of the manufacturer. I guess I’ll have to go look at them. Maybe then I can find a manufacturer name and part number. There just listed for $50 right now. I thought I might be interested if they fit.
  5. J

    Nerf bars fit

    I’m guessing not but will the bars from a ‘10 liberty fit an ‘02? Got a chance at some incredibly cheap. I don’t think they’d fit but thought I’d ask just in case.
  6. J

    Help Please 2005 Liberty with frame rot?

    What is your skill level? You can get inner and outer rockers for it but you’d need to weld them in. I personally wouldn’t scrap it if you’re only hoping to get a year out of it anyway.
  7. J

    What causes a P0141 or similar O2 sensor heater circuit code?

    Mine throws the code only if I maintain an rpm much higher than idle when the engine is really cold. Once the engine warms up it goes off. I’ve only noticed it in the winter when it’s really cold out and I don’t give it time to get warmed up before I hit the highway. Then it goes off itself. If...
  8. J

    Please help- Rear Lower Control Arms

    Same thing happened to me. The bushings looked ok but I replace them and the arms anyway and it corrected the issue.
  9. J

    What’s a fair value on

    I’m not buying it, he may buy it from someone else. I’ll see if I can get a vin. I’ll hopefully get to look at it before he would buy it.
  10. J

    What’s a fair value on

    My dad is considering a vehicle to leave behind in the winter and not take it to they’re winter home. It’s an 02 sport 4wd 70000 miles I guess it’s in immaculate condition and it’s been very well cared for. I’ve got my own 02 so I kind of know problem areas and I could work on it for him if...
  11. J

    ‘02 upper control arm replacement

    For the front, I’ll give that a try. I hadn’t thought of that. For the back though, I don’t think I can get a deep socket onto it to attach a wobbler to. I can’t see it through the front either. It’s an early pre-lowered ‘02. Could it be different from other years or even later 02’s. It’s just...
  12. J

    ‘02 upper control arm replacement

    So I’m replacing the upper ball joint on the ‘02 4x4 without antilock brakes. How is this task done?? I broke down and watched a YouTube video but mine is obviously different. The front bolt won’t come out since the hard brake line is in the way. I was able to move the top line enough to get the...
  13. J

    O2 Sensor Accessability

    I agree. The hardest part is probably the wiring so you don’t break the clip. Once that’s done it’s not a real hard job. It can be a bit of a pain to get at them but not bad. Just remember to use the proper sensors (brand). If you don’t you’ll be doing the job again soon.
  14. J

    Replacing sway bar end links

    Thanks. The vise grips worked. Got it all together.
  15. J

    Replacing sway bar end links

    Sorry. I meant this for the tie rod ends. I’m doing both the sway bar end links and the tie rod ends. I guess I had the end links in my head while writing that. It’s the tie rod ends. I can turn the nut but the while rod or bolt spins.
  16. J

    Replacing sway bar end links

    I’m replacing the sway bar end links and when I went to take the old one off it just spins. I’m using an impact now but it still just spins. By that I mean where the rod goes into the end link just turns. Any ideas how to get these off with the rod just spinning? I don’t have a cutting torch...
  17. J

    Other jeeps

    My favorite is the cj7 without a doubt. I really do like the kj though. I used to not like them much other than the looks. Then my wife made me buy one for her. I’ve fallen in love with the thing. I like it on and off-road. It’s really surprised me.
  18. J

    Other jeeps

    Right now the Libby and an xj and cj. I’ve had many other Jeeps over the years though. Several cj’s and at one time 4 xj’s and 2 cj’s sat at my shop. I’ve had pickups (full and midsize) full-size wagoneer’s and cherokee’s, cj6, 5, and 7’s, even a commando. I’m a jeepguy through and through and...
  19. J

    my temp selector is reversed(hot is col cold is hot). what could be wrong??

    No I actually ended up leaving it alone after getting frustrated with it. I know I need to get it done but other projects have been more important. My next check is to pull the dash again to see if the actuator or blend door got flipped somehow. But that takes pulling the dash and I haven’t had...
  20. J

    Replacing rear lower control arms

    Yah, I couldn’t believe it. I was expecting $10-15. I checked the invoice a couple times in disbelief.

Random media

hound being cool
jeep kj crd
Before
Fender 7
543.jpg
faros reglaje
2012 03 29 17 19 50 363
completed rear guard 007
After: Wider stance

Latest posts

Members online

Total: 656 (members: 1, guests: 655)
Top