Search results
-
M
High RPM and Surging
So my newest issue seems to be a high rpm (~1100 at idle) and when just cruising without applying gas (~1600). it doesn't happen all the time it's random as far as engine temp and driving conditions. I have been able to put it into neutral and rev the engine a couple times and get the rpms...- mikeandamy
- Thread
- Replies: 1
- Forum: KJ General Discussion
-
M
Thoughts on the Fuel/Air sensors
I was thinking about replacing my MAP, IAC and TPS sensors and was wondering: 1. overall do you think it's a good idea to replace all the sensors? I pulled my IAC off and it was heavily dirty, cleaned it off but it won't come fully clean so I thought I would replace it and figured while I...- mikeandamy
- Thread
- Replies: 2
- Forum: KJ General Discussion
-
M
Figured out my P0442 code. I think...
should there be clamps on all 3 hose connections on the canister? i have a p0442 code and when i looked underneath there are no clamps on any of the connections.- mikeandamy
- Post #17
- Forum: KJ General Discussion
-
M
A/C Clutch or condenser?
great. thanks for the info!- mikeandamy
- Post #11
- Forum: KJ General Discussion
-
M
Belt Question
i think it was advanced autos house brand? I was in a pinch and that was all i could get my hands on.- mikeandamy
- Post #3
- Forum: KJ General Discussion
-
M
Belt Question
I had my a/c Compressor freeze up on me over the summer so i took the pulley off and rerouted the belt as one of the bypass threads had suggested. i notice that the belt which is only 3 months old looks to be splitting in half down the belt like in the middle of the groove so it would form 2...- mikeandamy
- Thread
- Replies: 2
- Forum: KJ General Discussion
-
M
A/C Clutch or condenser?
is there any particular place you purchase the Gates EPDM belt? I see Rockauto has a couple Gates belts but nothing says epdm on it- mikeandamy
- Post #9
- Forum: KJ General Discussion
-
M
Trouble starting with cool not even cold temps
cleaned the iac and throttle body the other day. no problems since. there wasn't much carbon on it but maybe that was the culprit. Thanks again everyone for the advice........- mikeandamy
- Post #7
- Forum: KJ General Discussion
-
M
Replace BOTH rear upper control arms?
my jackass mechanic (who ended up stealing the change from my ashtray a sweatshirt that i needed to return and my gps) quoted me 450 for that "subframe" as he called it. I said why don't you just replace the worn out bushings and he said they don't sell just the bushings, you have to buy the...- mikeandamy
- Post #23
- Forum: KJ General Discussion
-
M
Trouble starting with cool not even cold temps
02 limited. IAC? where is it located and how hard is it to change? I am pretty handy with a hammer. no but really, I have done some repairs..........- mikeandamy
- Post #5
- Forum: KJ General Discussion
-
M
Trouble starting with cool not even cold temps
Update for this morning, the jeep started right up. the current temp is 50 so I would say it is about the same as the night before. I'd also like to note, we bought the jeep last december and struggled with this same first start of the day issue with it all winter, once the warmer air moved in...- mikeandamy
- Post #2
- Forum: KJ General Discussion
-
M
Trouble starting with cool not even cold temps
Hey Guys, You guys really helped me with my rear diff issue, well now i have a new one that I could use your help with. Last night we reached about 47 degrees in Boston and this morning the jeep didn't really want to start. she cranks and sounds like shes starting but never "Catches" she...- mikeandamy
- Thread
- Replies: 6
- Forum: KJ General Discussion
-
M
A/C issues on my 02'
same thing happened to my wifes '02 right before the compressor seized up. new compressor and extra parts will be delivered today......- mikeandamy
- Post #4
- Forum: KJ General Discussion
-
M
lights- suggestions
what about these? I'm curious to see if anyone has tried these leds. very expensive, but might be worth it Point Spring And Drive Shaft Co. Part 27250C - 7" Round LED Headlamp- mikeandamy
- Post #8
- Forum: KJ General Discussion
-
M
What did you do to your jeep today?
stared at it out the window, thinking of all the money she's cost me so far.......- mikeandamy
- Post #449
- Forum: KJ General Discussion
-
M
Rear end grind/chatter/squeak?
SO i changed the diff fluid today. Gears looked great and no play in them at all. cleaned it all out with brake cleaner and put in fresh Lucas 80w-90. threw some sea-foam in the gas, oil and vacuum line. changed the spark-plugs. took her for a cruise and have not heard the noises since. I...- mikeandamy
- Post #7
- Forum: KJ General Discussion
-
M
Rear end grind/chatter/squeak?
Thanks. I'm gonna change the oil this weekend and see what happens. Thanks for the info. I'm gonna be my own mechanic or else I'll go broke......- mikeandamy
- Post #6
- Forum: KJ General Discussion
-
M
Rear end grind/chatter/squeak?
I would hope it to be the parking brake but since I had the rear brakes done about a month ago i would hope the mechanic would have seen something wrong. Unless he didn't really do anything with them........ I haven't had the rear diff done. I was gong to have at it soon. my build sheet says...- mikeandamy
- Post #4
- Forum: KJ General Discussion
-
M
Rear end grind/chatter/squeak?
Hey everyone. I have an 02 limited with 116300 on it. since i bought it it has had a grind/squeak and occasionally a chatter from what seems to be the rear end. it happens at slow speeds in forward and reverse at low speeds and is mostly when i turn the wheel. i have brought it to 2 mechanics...- mikeandamy
- Thread
- Replies: 6
- Forum: KJ General Discussion
-
M
Cheap AC Bypass **PICTURE**
this worked for me. my ac pulley seized up. made a terrible noise for 2 days then broke the serp belt. pulled the ac pulley off (which was a major pain in the a$$) but the routing worked great with the 82.5" belt.thanks for all the info guys, everyone was a real help. love all the info and...- mikeandamy
- Post #43
- Forum: KJ General Discussion
