Ok so if I use 927s i most likely will not need any spacers? I was reading on other posts about these but didnt see anything about the 926 ride quality and fitment. Thanks
I was finally able to fix my C.C. on drivers side . Got a new one cut and welded on from a local muffler shop. Save a lot of $ and headache. I thought it was the head gasket. The smoke issue and bad smell i had went away. I should have took a pic of the old one. It had metal chips and broken...
I smell more unburned fuel. And its more brown /white smoke. My coolant level hasn't moved or fouled with oil. Head gasket could be another issue still. I dont have any codes. Could a bad cat cause a smoke issue thou. Not sure where to start now.
So i found where the rattle is coming from and its from inside the driver side catalytic converter. There is something inside that sounds like a popcorn kernel rolling around. I also have been seeing more white smoke and horrible smell. . Any suggestions . ? Replace driver-side or both?
Hello im getting a rattle sound coming from drivers side underneath by the cat exhaust. I was thinking it might be my tensioner but the sound is in park or neutral. And when i raise the rpm up. it rattles up then goes away after i let off the gas. Then comes again . Could this be my exhaust as i...
All waxed up . I used that banana wax from “Chemical guys” . Great stuff. The dirt floats right off . I had tried many other waxes but this stuff is different.
Its bananas!
So I accidentally deleted the post that i meant to edit . If you could reach back about the brake issue i had about going down hill on neutral with the engine off. Is it normal to have stiff braking? Thanks again
Thanks . Thats what I needed.. some good honest feedback. I came across the “rock lizard fab” design but is discontinued from what i found. So the only real way is ARB.?
Hello i wanted to see if anyone tried to use this i found online . I was thinking of upgrading my front bumper on my 04 KJ but it is fabricated for 07+ Wrangler , JL, and JT. I like it and its cheaper than ARB . Can it be done? Any tips thanks!
Hello im noticing my exhaust smells burnt and smokes after idleing for very long. Could this be due to a rusty muffler. Could there be a leak coming out ahead of the muffler. Any tips? . Thanks
04 3.7l 148,000
I got the pressure reading at 4psi at parking idle . upon start up it went from 15 psi to under 10psi. I revved it to about 3000rpm and i got some pressure at 25psi barely.
How is that my engine is still running fine with this? Im going to do an oil flush and see what happens . Maybe its time...
Ok so I unplugged the oil sender unit and the red light stood on. I plugged back in and same flashing issue periodically while driving . Could it be the connection to the harness? I have a strong start up and idle so it cant be the pump . Can i just bypass the connection some how ?
I was thinking it might be a
i was thinking it might be the pump because it started to get cold in the mornings here in SoCal . I noticed at first when i left early one morning and it started to flash but then it keep coming back on more and more as i leave in the mornings. I use amsoil and...
The red light is still flashing only when i come to a stop then goes away when i drive normally with out stopping. Can the electrical connector itself be bad? I feel like the light wants to stay off.
I was replacing my oil sender unit and the tabs broke off where the red tab goes . I plugged it back in and my light still comes on and off still. What should i do next? Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.