Search results

  1. L

    External Transmission Cooler

    Just found a radiator leak on my 02 Liberty which has the trans fluid cooler built into the radiator . I have an 05 parts Liberty that I could use the radiator & external trans fluid cooler out of . The 02 has the 45 trans & the 05 has the 42 trans so I don't know if a line swap is possible . If...
  2. L

    Buying liberty today!

    I agree , I would be much more interested in one that was rust free than one that had rust spots .
  3. L

    42rle solenoid pack

    Need help removing transmission valve body - Jeep Wrangler Forum Hope this helps . Didn't turn blue like some links but if you put the pointer on it , it works . Put the pointer over the part of the link about removing valve body , not over Jeep Wrangler Forum .
  4. L

    Need help injector swap from 02-03 to 04+

    Does anyone really know if the 4 hole injectors are a significant improvement over the stock 02 & 03 injectors ?
  5. L

    Finding always on power wire under dash

    Why don't you just run a wire from the fuse panel ?
  6. L

    Hubcaps

    I have 05 & 02 Liberty's . The 05 has nice alloy wheels . The 02 has the factory steel wheels that need attention . I have tried to find nice , used alloy wheels at a reasonable price & so far , no luck . I am thinking of selling the 02 & have new tires to install . I have found liberty hubcaps...
  7. L

    Need help injector swap from 02-03 to 04+

    I read this thread & did a small amount of checking , what I found said it wasn't a compatible swap . Don't know why . I don't think I'd chance it unless I found credible evidence that it'd work . Might screw up PCM or something . Since the PCM just sends a ground signal to the injectors to fire...
  8. L

    '02 Jeep Liberty: Opinion wanted

    The mileage alone would keep me from paying that much for an 02 2WD Liberty . There are nice 4X4 Liberty's of that vintage in my area with a lot fewer miles in the $3,000 & less range .
  9. L

    Not sure where this oil leak is coming from

    It's not difficult to get the cover off & on .
  10. L

    Scangauge

    Thanks a lot , I'll check the links .
  11. L

    Scangauge

    I was reading the thread about KJ not running hot enough . Exactly what is the scangauge you guys are running all the time & what all does it show ? Are there some that are better than others ? I'm probably interested in a reasonably priced one that does the job . Links ?
  12. L

    02 jeep liberty

    I believe the coils have constant power on one wire & the other wire is a signal ground wire that goes to the PCM . If the coils have power but not firing I'd say they're not getting the ground signal from the PCM for some reason . Are all engine & head grounds clean & connected ?
  13. L

    2004 3.7L timing not correct?

    I recently installed a crank kit in my 02 . Installed timing chains just as OP described . Crank gear dot at 6 , idler gear dot at 12 & cam gears with V6 at 12 . Turned fine & runs fine . Are you sure the pistons are hitting the valves ? A rod cap installed backwards will cause problems . Did...
  14. L

    He bought a jeep

    Yep , pumped my legs off to give my butt a ride for hours at a time .
  15. L

    Engine Dilema

    97 Nissan Pickup .
  16. L

    Power Steering Loss at Idle/Low Rpm

    Who furnished the parts , you or the shop ? If the shop furnished the parts , take it back till they make it right . If you furnished the parts , either you haven't got it bled properly or you got a defective part .
  17. L

    Engine Dilema

    I had a friend , professional welder , weld a cracked cast iron exhaust manifold for me . He said the rod was expensive , if I remember correctly I believe he said it was a nickel rod . Anyway I had that truck for about 5 years after that & the weld held with no problems .
  18. L

    Error Code P0430 Catalyst Efficiency

    Dude , I didn't start the argument & I thought you was asking the question to the forum . If you want one person only to reply to your posts , there's always PM's .
  19. L

    Error Code P0430 Catalyst Efficiency

    As far as I know it would be legal to try & clean them & I've read about using soapy water & other things with mixed results . Not what I was referring to though .
  20. L

    Error Code P0430 Catalyst Efficiency

    Don't have to remove them either . As long as the cats aren't clogged & the engine is running fine you can get rid of the codes .
Top