Search results
-
6
42RLE transmission suddenly won’t shift
2005 Liberty Limited 4WD/automatic with 189000 mi. Has been working perfectly then suddenly I get a transmission temperature warning and jeep goes into limp mode, so I pull off road to parking area now it won’t shift into any gears. Towed it home and pulled only a P0700 code with my OBD2 code...- 69BahamaYellow
- Thread
- Replies: 34
- Forum: KJ General Discussion
-
6
Need wiring help
USS2defiant gave some great info on the wiring there to fix up the wiring that goes behind the front bumper fascia. When my jeep was wrecked, this wiring was torn to pieces, so I didn't even bother trying to fix it. I found a factory replacement harness at a junk yard for $15 that already had...- 69BahamaYellow
- Post #87
- Forum: KJ General Discussion
-
6
Anyone added foglights to a base Liberty?
I've got the light blue wire at connector C107, since I had to get a front wiring harness from a donor car (that had factory fog lights). Looking at the plug on the body control module, I'm beginning to see why the mopar kit doesn't connect there. The plug is definitely a specialty item, and...- 69BahamaYellow
- Post #7
- Forum: KJ General Discussion
-
6
Trans failure, NEED HELP!
I have a 2002 Liberty with the 45RFE. At about 50,000 miles, one of the screws on the side of the valve body had come loose and allowed one of the accumulator pistons to blow out into the transmission pan. This caused a lot of the same driving symptoms you described, and I had to tow it to a...- 69BahamaYellow
- Post #13
- Forum: KJ General Discussion
-
6
Need wiring help
I'll chime in on this one, since I just replaced the front clip on my 2002 Jeep Liberty after an accident (where the airbags did deploy). The place to check for wiring problems is in the main wiring harness that wraps around the bottom of the radiator support. This harness is inside a long "U"...- 69BahamaYellow
- Post #73
- Forum: KJ General Discussion
-
6
Anyone added foglights to a base Liberty?
Fog Light Wiring After a little more researching, it looks like all I need to do is locate pin# 17 on the connector to the body control module (located on driver side left inner fenderwell near firewall) and run a wire from that pin to pin # 85 of a standard fog light relay. I can wire pins 86...- 69BahamaYellow
- Post #5
- Forum: KJ General Discussion
-
6
Water pump
I just replaced the water pump on my 2002 3.7L V6. This is a surprisingly easy job. Only took about 15 minutes. Just use a big pan to catch all the antifreeze that drains out; then you can put a coffee filter in a big funnel to strain out any dirt or impurities when you put it back in. I did...- 69BahamaYellow
- Post #8
- Forum: KJ General Discussion
-
6
Anyone added foglights to a base Liberty?
I read the mopar install procedure on another post. looks simple enough, but I'm using the switch and wiring from a junk yard car (not the Mopar retrofit wiring harness this install process references. After I replaced my steering column headlight switch with the new one from the junk yard...- 69BahamaYellow
- Post #3
- Forum: KJ General Discussion
-
6
Anyone added foglights to a base Liberty?
After crashing my 2002 Liberty, that never had fog lights, I got the front bumper (and wiring) from another 2002 that had factory fog lights. The wiring to the fog lights from the donor car is all part of the same harness as the headlights and front turn signals, so it plugs right into the body...- 69BahamaYellow
- Thread
- Replies: 8
- Forum: KJ General Discussion
-
6
HOW TO: How to install Mopar Foglights
2002 Mopar fog light install on Jeep Liberty After crashing my 2002 Liberty, that never had fog lights, I got the front bumper from another 2002 that had factory fog lights. The wiring to the fog lights from the donor car is all part of the same harness as the headlights and front turn...- 69BahamaYellow
- Post #24
- Forum: How To
-
6
Need advice on Replacing Airbags after a crash
I've driven the jeep about 2000 miles since the airbag replacement, and everything seems to be functioning normally (ie. airbag light comes on for 5-6 seconds after startup and then goes out, just like it did before the crash), so this seems to indicate there should be no problems swapping...- 69BahamaYellow
- Post #7
- Forum: KJ General Discussion
-
6
Need advice on Replacing Airbags after a crash
Got conflicting answers from multiple dealers on whether to 1) keep existing ACM and take it in to dealer for reset, or 2)replace ACM. In all cases, they agreed, that either the existing ACM or new ACM would not trigger the airbags, so I decided to swap the existing ACM for the used one I got...- 69BahamaYellow
- Post #6
- Forum: KJ General Discussion
-
6
Need advice on Replacing Airbags after a crash
So I installed the airbags over the weekend, but have not hooked the battery back up yet. Going to call the dealer on Monday to see if they can tell me whether or not it's ok.- 69BahamaYellow
- Post #5
- Forum: KJ General Discussion
-
6
Need advice on Replacing Airbags after a crash
Thanks for the tips. I checked my VIN with my local Jeep dealer, and they said my car does not require the airbag recall fix. They said it only applied to certain production runs, so that explains why I never received any notice. The dealer also told me that they could not reset my ACM for...- 69BahamaYellow
- Post #4
- Forum: KJ General Discussion
-
6
Need advice on Replacing Airbags after a crash
I've got a 2002 Jeep Liberty Sport 3.7L 4X4 that was recently crashed in the front, and both airbags deployed. I have just finished repairing the crash damage and bought a used set of airbags that also came with an airbag control module, that I'm not sure I need. 1) In searching the web for...- 69BahamaYellow
- Thread
- Replies: 9
- Forum: KJ General Discussion
