Search results

  1. gtommec

    Taillight Tinting...sort of

    Meh, like I said i was just behind a Nitro and thought the dimensions looked the same, I didn't actually compare them (and now that I have I see they are completely different sizes)
  2. gtommec

    tow hooks

    yes part number 52059352AB which sell for $15.25 a piece and you will need 2. (and you will still have to buy 4 nuts from your local hardware store)
  3. gtommec

    Taillight Tinting...sort of

    I was behind a Nitro today and got thinking about this, will Nitro taillights work on the KK for another option as the Nitros taillights look better than the KKs IMO Sorry for the hijack Marlon :D
  4. gtommec

    Newbie here!! I need help!

    go to jeep.com and input the VIN it will tell you if there are any outstanding recalls.
  5. gtommec

    Jeep keys

    request one here: http://www.jeep.com/webselfservice/jeep/index.jsp?screenName=customer&country=us&emailUrl=goToEmailForm%28%27R%27%29 (go to the 'Send us an email' link)
  6. gtommec

    Jeep keys

    you can always get your build sheet, it will tell you if you have the sentry key.
  7. gtommec

    tow hooks

    the bracket (silver) with the studs and nuts in this picture is what is missing
  8. gtommec

    Key for Spline Lugs?

    you can get a 12-point socket that is a tad bit too small and hammer it on. Then use the ratchet and back the lock off, I have done this probably 20 times.
  9. gtommec

    OH NO! Rental car! seriously?

    My 2002 2WD Sport was a fleet vehicle first owned by CBN (http://en.wikipedia.org/wiki/Christian_Broadcasting_Network ) :freak3: My 2002 Renegade (which has only been registered in Michigan) says the following on it's build sheet: YALA Executive Lease Program YAN Active Lease Vehicle YAMY...
  10. gtommec

    tow hooks

    ummmmm NO the parts not pictured are the hardest parts to get, they are either an M-shaped bolt or a flat bar with 2 studs on it that goes inside of the front support behind the crush cans.
  11. gtommec

    tow hooks

    also do you have the rest of the hardware? (the studs not pictured)?
  12. gtommec

    OTIS to EVIC

    but that is because you have a 2004, it is not an issue for pre 2004 models and even on the 2004 models the only issue is the ambient temperature, everything else will work fine. The EVIC in my 03 is from a 2000 WJ, another is from a 2001 300C
  13. gtommec

    Hollander 9024 wheel

    people on here will tell you that you can't go to a factory Jeep 15" wheel on your liberty, but I can tell you that I installed the factory 15" wheels from my 1998 Grand Cherokee on one of my 2002 Libertys and it cleared everything just fine.
  14. gtommec

    Jeep keys

    as Marlon said they didn't start putting them in all keys until the 2005 facelift. If your 2002 has it you will have a telltale on the dash that comes on for a bulb check when you first start you Jeep. It looks like a key with a slash through it and it is under your Airbag light and to the...
  15. gtommec

    OTIS to EVIC

    I think they should work, atleast they did for both of mine...
  16. gtommec

    Debating Mopar fog lights...

    NOT just some states, it is a USDOT regulation which means all cars registered in the United States have to comply.
  17. gtommec

    Debating Mopar fog lights...

    I hear ya, I have mine wired the illegal way, really the only time it comes into question is if your state does safety inspections. as for the kit, yes it will come with everything you need.
  18. gtommec

    Debating Mopar fog lights...

    ah yes I forgot we were talking about the MOPAR foglights and not the factory-equipped ones. One note though if you intend to hook them up to your parking lights they will be illegal as they must by law turn off when you turn your highbeams on.
  19. gtommec

    Jeep keys

    not all Libertys have transponder keys (none of mine do)
  20. gtommec

    Debating Mopar fog lights...

    No the foglights will work with just the parking lights on or with the highbeam headlights on.
Top