Search results
-
Questions about tires & lift
If I had to deal with snow and ice for half the year I would have two sets of tires. Studded snow tires would be bad arse where your at, and then get a set of decent AT tires for the other six months. When I lived in snow country (Michigan), having snow tires made winter driving a breeze. If...- eyehatetofu
- Post #5
- Forum: Tires / Wheels
-
-
swampera
He didn't ask for daily driver tires, he asked for swamper tires. Who makes better swamper style tires in that size better than Interco?- eyehatetofu
- Post #4
- Forum: Tires / Wheels
-
swampera
Interco has the SSR in 265/70/16. They also have the LTB in 31/11.5/16. Those are both some serious mud turrs. SSR | Interco Tire- eyehatetofu
- Post #2
- Forum: Tires / Wheels
-
where to buy ome springs??
It says the lift amount is the same for the both. Not sure though as I don't have any experience with the 927's. Ride quality has been great though with the 926's thus far. Much better than the stock suspension with a Daystar lift, which is what I had previously.- eyehatetofu
- Post #9
- Forum: Lift Kit Discussion
-
where to buy ome springs??
If your not dead set on the 927's, Morris 4x4 has the 926's and 948 rears with free shipping. I bought the 926's and a bunch of other things from them about a month ago. Hassle free, free shipping, and great customer service too. Old Man Emu Suspension Kit Parts - Liberty KJ Morris 4x4...- eyehatetofu
- Post #7
- Forum: Lift Kit Discussion
-
245/75r16 Rubbing Issues
235 85 16's are a 32 inch tire. 245 75 16's are closer to 31 inches. I was at 21 inches and cleared 245's just fine. First set had no rubbing issues (except the sway bar; not really a problem though), second set were a little bigger and had to pound the pinch weld flat; easy to do. You...- eyehatetofu
- Post #2
- Forum: Tires / Wheels
-
Actual Lift Amount - Lets Compare Fender Heights
Just updated my girl with a pair of OME 926's and some new Bilstein shocks; spaced the clevis a bit too. Running 22.5 inches up front currently. Need to freshen up the rear now; it's still sitting at 21 inches.- eyehatetofu
- Post #175
- Forum: Lift Kit Discussion
-
Couple of Jeep pics from the DC Auto Show
My brother was at this. He kept texting me pictures of some Lexus super car. I told him I didn't care, and if he was going to text me pictures it needed to be of the chicks in bikinis standing by the cars. He said it was not that kind of car show. Sounded lame. :D- eyehatetofu
- Post #5
- Forum: KJ General Discussion
-
Can't get axle nut off
Socket doesn't fit through the center cap on my wheels.- eyehatetofu
- Post #5
- Forum: KJ General Discussion
-
Can't get axle nut off
It was not. Then I realized that it should be. Then I realized I shouldn't quit my job to become a mechanic. :D Got it all figured out now.- eyehatetofu
- Post #3
- Forum: KJ General Discussion
-
Can't get axle nut off
So, I am doing some work on the ol' girl and need to remove the axle nut. I originally didn't have my front driveshaft in and the axle just spun; didn't think that part through. So I tried having someone step on the brakes, but that was a no go; I could still spin the axle with the brakes...- eyehatetofu
- Thread
- Replies: 8
- Forum: KJ General Discussion
-
ESP/BAS, TCS and ABS lights on
Also check the ABS sensor wires that plug into the front hubs. If the wires pop out of the little clips that hold them, they can rub. Had the same issue you are describing and that's what it was.- eyehatetofu
- Post #3
- Forum: KJ General Discussion
-
What does everybody pay for their fuel
I was shocked when I drove by the gas station this morning; gas was $2.99. Can't remember the last time gas was under 3 bucks a gallon. It was still $3.60-.70 a few weeks ago. Hopefully the price keeps on going down. Would really help my financial situation.- eyehatetofu
- Post #512
- Forum: KJ General Discussion
-
Intermediate shaft and cv question
Well off to Ebay. Thanks folks.- eyehatetofu
- Post #8
- Forum: KJ General Discussion
-
Intermediate shaft and cv question
Where did you guys get your intermediate shafts from? I have found it one place online (for $150), but can't seem to find it through my normal part sources.- eyehatetofu
- Post #4
- Forum: KJ General Discussion
-
ABS/ESP lights- can't get fault code- Just replace sensor?
Check the sensor wires. Should be all four corners. I had the same issue and it was the driver's side front ABS sensor. The wire came out of the clip that holds it and rubbed against something causing it to fray. When I was searching what it could be, a couple other things cause the same...- eyehatetofu
- Post #4
- Forum: KJ General Discussion
-
Anyone running Hankook DynaPro ATm's?
Right on. I like hearing that I didn't just waste a ton 'o cash. Glad to hear some real world reviews. I really like mine so far; especially for the price. :cool:- eyehatetofu
- Post #4
- Forum: Tires / Wheels
-
Anyone running Hankook DynaPro ATm's?
Just bought a set of the DynaPro ATm's last week. Was going to buy another set of Treadwrights but the stock of LR C tires were gone for good. Have been sick of running LR E tires since I don't wheel at all anymore. :( Discount had the DynaPro's for 93 bucks a piece which came out to way less...- eyehatetofu
- Thread
- Replies: 15
- Forum: Tires / Wheels
-
I'm goin' to stop posting at 9999.0 posts.
Ahhh good riddance you damn canuck. On your way out don't let the door hit ya where the good lord split ya. the_finger.gif I keed, your ramblings and musings are usually quite entertaining. Might as well stay around til 20,000 posts. :D- eyehatetofu
- Post #5
- Forum: KJ General Discussion
