Search results

  1. R

    trying to unhook harness to back of fuse block

    Got it
  2. R

    trying to unhook harness to back of fuse block

  3. R

    Wheel speed sensor issues

    Have had to fix these a few times. If everything was replaced to the harness plug you may have a wire that did not connect right. I do not twist them back together as they are from factory.That creates broken wires. If you had said that your speedometer would intermittently act up I would say...
  4. R

    trying to unhook harness to back of fuse block

    As- over elbows trying to get to the heater core and blend door motor. Doing both since I am there. Everything is free except the harness. Thought I would simply take the bolt out of the center of the block and unplug it. Bolts are free and I am not smart enough to get it unplugged. I dont see...
  5. R

    Blend door or heater core problem?

    Just used CLR type mixture for 20 minutes and flushed again. Nothing but clear water. If it was plugged shouldn't I get a least some dirty water? Again both hoses are hot at operating temp. Ac condenser leaks so air does not work anyway. The blend door is closed off to the passenger side of the...
  6. R

    Blend door or heater core problem?

    Thanks Bill. I will look through that section and see if I can find something. If both hoses to the heater core are hot wouldn't that somewhat eliminate that part? I know the door is not moving when the temp dial is turned and from what I found in a video it looks like mine is in the hot...
  7. R

    Blend door or heater core problem?

    Don't have time until weekend take the dash apart and also wanted to try to find out what the problem is for sure. I heard no noise when using the switch but they tell me around the hose that I don't hear anyway! Cut a hole to see if a problem was obvious or I could manually move the door for...
  8. R

    Blend door or heater core problem?

    I flushed the heater core and water was clear from the start. No change in heat. I do not hear any noise where I rotate the switch. Now to top it off this has to be a daily driver for a while. Hit a deer with primary vehicle last night. 4* this morning. Don't have 10 hours to take the dash out...
  9. R

    Blend door or heater core problem?

    Sorry about that. It is 2003 Should I be able to see the flap door or linkage behind the glove box move? Thanks
  10. R

    Blend door or heater core problem?

    Not sure what the next step should be. All 4 motor speeds work. Vent selector changes as it should. Heater hoses are hot. Air is slightly warm but not hot at all. Coolant is full. Ac does not work so it does not change when switched from hot to cold. I can try to flush the heater core before I...
  11. R

    oil leak on top of intake

    Thank you. I need to track down some hoses it looks like
  12. R

    oil leak on top of intake

    yes they are. When this engine was replaced they bypassed the egr valve. The metal tube was cut, flattened and welded up. The connector has been left unplugged. today a local shop recommended we put an egr on and hook things up the way they should be if we want the codes and CEL off. makes...
  13. R

    oil leak on top of intake

    p0152 and 0158 for the 02 sensors. Found the connector to the TPS was not staying locked in place. Got that fixed and that made a world of difference in the car running. Drove about 15 miles and purred like a kitten.
  14. R

    oil leak on top of intake

    Thank you for the links. A lot of good information. I spent an hour looking through that last night. I did do the water test a couple times but had no change in idle. Cleaned up oil and let it run a good 30 minutes. after about 10 it smokes but did not puddle up beside the injector this time. I...
  15. R

    oil leak on top of intake

    Thank you. No oil around spark plug and valve cover rail is dry. had unplugged coil packs and injectors thinking I may need to take valve cover off again so I will clean up oil and re-assemble everything and let it run. vacuum leak may be tough because we had a could issues to start with on...
  16. R

    oil leak on top of intake

    can't see it very well here , but between the injector and the blue grommet on valve cover
  17. R

    oil leak on top of intake

    I have puddle of oil on the driver side intake to the right of the first injector. Valve cover gaskets are new and are dry around the edges on both sides. I am not positive that is where the leak is , but the oil has puddled there. Any ideas on what the next thing to do is? I have not ever had...
  18. R

    may have got scammed ..

    Thank you. after crawling around underneath trying to find this oil leak I am almost sure it was not a drive train swap. There are drive shaft bolts on the front of the rear shaft( too transfer case) that still have old rust on the threads. Didn't get to mess with it tonight but still have an...
  19. R

    may have got scammed ..

    Sorry i realize this is a liberty group but I my 18yrd just bought an 08 commander to leave for college with in a couple weeks. I feel like a fool and should have ask more question and educated myself more. We drove several hours and the story was it had engine, tranny and transfer case replaced...
  20. R

    06 cold / damp starting problem

    No lights. It probably has been more than 35k since new plugs. It should be here in the next few days so I will check IAC . Thank you for the suggestions

Random media

100 3718
backside
tmp 20140113 140611 2143916489
Synthetic Winch Rope. no2
5177.jpg
Jeep side
Badlands National Park
2010 Patriot 600pix
Photo046

Latest posts

Members online

Total: 569 (members: 2, guests: 567)
Top