Hello Ksat. Thanks for the reply. The fuel pump currently works fine, it's just very old, has lots of miles and I would like to replace it before it decides to make me replace it. I have wanted to replace it for a long time, just hard to find the time. I bought a replacement pump (ACDelco)...
Hello All. I have a 2004 KJ with a 3.7. Does anyone know the connector size for the two connectors that come off of the fuel pump and plug into the quick connect tubes inside of the tank? Also the size / diameter of the corrugated tube? Below is a picture of the connectors and tubes I am...
Absolutely. Great advice. I recently replaced my entire system excluding the evaporator (I just flushed it out). I picked up an entire UAC system from Rockauto. The first compressor I received had a bent pulley, so had to return and wait for another one. I also replaced the two pressure...
If your compressor is shot internally, you will need to change out the condenser and I would definitely change out the accumulator while you have the system apart.
Hey All. I found a belt that will work to bypass the power steering pulley. I have a 2004 Liberty and an 82" belt worked perfectly. The belt I got was for a 2018 Genesis G8 with a 3.8 Liter motor (6 rib, 82"). I'm going on a long trip with the Liberty and wanted a backup just in case the ps...
Unfortunately I can't find a mopar pump. The dealer says they are discontinued. Anything you see on ebay, etc..I'm assuming in fake. If anyone knows of a way to get a genuine mopar pump, please let me know.
Hello All.
Does anyone have any recommendations on a fuel pump for a 2004 3.7.
I've been looking at the pumps on Rockauto, but based on some of the posts on this website, it seems like they can be hit or miss? Anyone have any experience using a Walbro fuel pump (Not sure if they make one...
The wheels are 8" Pro Comp (51 Series Rock Crawler) Flat black with 3.75" backspacing. The model # is 51-5865F. There are no problems with clearing the brake calipers. Probably around 2 inches clearance in the rear and 1/2" to 3/4" in the front. As Tom said, the stock backspacing is 5". The...
I have Cooper Discoverer STT Pro 30x9.5 15 mud tires on 8" Pro Comp wheels with an OME 2.5 lift, and in my opinion they do look just a little to small, but like you, I didn't want to do a re-gear. Based on the specs from Tire Rack, my tires are a tad larger than the Toyo Open Country...
So I decided to build a winch mount retaining my stock bumper. I used two 2x2 1/4" tubes and a universal winch mount from Harbor Freight which are welded and bolted together with grade 8 bolts for added strength. To mount it, I did something very similar to what Nate from Dirt Lifestyle did, I...
Hello All. I'm planning on replacing my aftermarket JVC stereo in my 2004 KJ with a factory stereo. I will probably pick one up at a junkyard or on Ebay. My question is, will a stereo out of any year KJ work in my 2004 KJ? Although the stereo's have minor differences in appearance, I noticed...
Hello All. I’m installing a Detroit TrueTrac in the rear 8.25 on my 2004 KJ. I’m having a difficult time finding the torque specs for the carrier. Unfortunately the Chilton manual doesn’t have any information about installing a carrier. After looking around on the web, it seems that the torque...
Hello Tom. I will be installing a DTT in the rear of my Liberty in the next couple of weeks. Any recommendation on what viscosity gear oil to run in the DTT? This is a 5 speed manual 4x4 that see moderate trails from time to time. Thanks.
Hello Gerry,
I just recently installed the same suspension setup as you are planning on getting (OME front and rear) in my 2004. I was also thinking of doing the upper control arms, but decided based on the advice from the experienced people on this forum and the place that I purchased the OME...
Hello All. I'm planning on installing a Detroit Truetrac (DTL-912A553) in the rear (8.25) of my 2004 Liberty. I noticed it has a sensor on the top of the axle housing which I'm assuming is a speed sensor. Will installing a Truetrac create any issues for this sensor? Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.