Search results

  1. u2slow

    Rocky road outfitters budget lift

    I added these later. IIRC, they are 3/8" longer.
  2. u2slow

    Rocky road outfitters budget lift

    I'm still on the original RRO arm bushings from about 2013. I developed occasional spring contact after upgrading to the diesel coils.
  3. u2slow

    Rocky road outfitters budget lift

    Ours was not typical then. Teraflex 2" and 160,000km on the stock springs... needed corrected upper control arms.
  4. u2slow

    Rocky road outfitters budget lift

    You need to put it back down on its own weight before you can assess if anything is binding. When I lifted ours with a Teraflex kit 12 years ago (also a top strut spacer) I needed RRO's upper arms to put he camber in usable range - wore the tires crooked in just a month (without).
  5. u2slow

    Fuel Injector Recommendations

    i installed SKP injectors from rockauto 2 years ago. no issues.
  6. u2slow

    Do I Have to Calibrate Speedo Again After Regearing to 4:10?

    Thats the beauty of the manual trans with the 3.7. Choose the rpm you like for the power/torque you want.
  7. u2slow

    Rear Upper Control Arm (Boomerang)

    Torn rubber bushing are visible when you get your head right in there. I put moog ones in the first time and they tore just the same (since i had lift with no arm-angle correction). Try a prybar between the arm and body and see if it shifts around far enough for the two to make contact.
  8. u2slow

    Rear Upper Control Arm (Boomerang)

    Yup - highest chance those are torn. Having any lift, which angulates the bushings, speeds up that failure. The arm itself is stupid-simple. About all it can do is rust away.
  9. u2slow

    Rebuilding stock suspension

    Slightly stiffer. Needed something better than stock that might not sag out as badly. I also didnt have luck with a spring compressor, so I built a wooden jig to carefully support it in my 30ton press.
  10. u2slow

    Rebuilding stock suspension

    I carefully put my own struts together. Rancho shocks and the diesel coils; so I could get what I wanted.
  11. u2slow

    oil leak

    Maybe as a temp fix. I wouldnt trust it for long. That "right stuff" rtv sealant may have better adhesion.
  12. u2slow

    Rebuilding stock suspension

    I dont recall that, but it was 10 years ago. My lower stuff is still all original, now at 318,000km
  13. u2slow

    Rebuilding stock suspension

    Upper front control arms are pretty easy. They are complete replacement unless you have aftermarket ones. The rear upper should also do a complete replacement. Lower fronts are the trouble.... 3 bushings and a balljoint (each) to press out and press in.
  14. u2slow

    SYE or custom driveshaft?

    My kit was sourced from some ATV parts supplier on ebay. (Not Dana Stuff) It seems this is a fairly generic type joint that shows up on ATVs and SxS's. Its also used on 99-03 Grand Cherokees, and perhaps others.
  15. u2slow

    Rebuilding stock suspension

    Its easy to think that. 30+ years of wrenching on my vehicles says otherwise. Pressing rusty/seized stuff apart can be unpredictably stubborn. Another strategy I use is to only work on one side at a time. Thats half the labour, and almost no duplication of labour.
  16. u2slow

    Rebuilding stock suspension

    Yup. Very much me too. Struts and front diff/axle work havent needed any re-alignment. I have a few vehicles on rotation so i dont have to perform miracles on only 1-2days downtime.
  17. u2slow

    Rebuilding stock suspension

    My strategy has been to slowly buy all the pieces in a semi-priority fashion. Some things need doing sooner, so do them sooner. "Everything at once" tends to screw me over so I don't do it. Nothing $ucks like clearing a 3 day window to do all the work and some stubborn or broken pieces wrecks...
  18. u2slow

    Offsets, Backspace, and other wheel info

    You mean 0.5" negative offset. Which equates to approx 4" of backspace on a 8" wide wheel.
  19. u2slow

    Suggestions for a '05 Limited KJ Modest Lift

    I'm at 12 years on the RRO arms... same bushings. I loctite the spacers on. Retorque the wheels only. hasnt been a problem in the same 12ish years.
  20. u2slow

    Suggestions for a '05 Limited KJ Modest Lift

    i use wheel spacers/adapters too, 1.25" i think they are. I felt the handling improved.

Random media

Lights & bumper1
IMG 1030
Some new upgrades!
100 2155
IMG 20120825 085815
3726.jpg
633CA82F-3871-4C91-B958-A561D4A92F39.jpeg
Photo Shoot
100 1955

Latest posts

Members online

Total: 575 (members: 4, guests: 571)
Top