Search results

  1. DadOSix

    What did you do to your jeep today?

    Could well be. This kid hit every hole, every trip for 6 months while learning to drive. Lol. He is much better now! Still gets to help with the job.
  2. DadOSix

    What did you do to your jeep today?

    Someone is getting ball joints after breaking down in the school parking lot. The tow bill was a bit steep, but since I already have the parts on hand, it is not too bad. Plus son#5 gets to see why i gripe about hitting every pot-hole instead of evading them things!n. My towing driver is...
  3. DadOSix

    No blinkers, hazards, or flashers when locking/unlocking

    I have nothing then. Maybe a friend or shop that has a high level scan tool could see what the data from the computer is doing.
  4. DadOSix

    Car Handling Issues at High Speeds: Rear-End Swerves and Knocking Sound – Seeking Advice!

    1 - rear bushings - lowers give the swerve on acceleration - deceleration - Just did these on my 04 (which btw, had already had the recall work done years back). Look at the link and info above us. 2 - The knock under your foot may well be the driveshaft from the transfer case to the front...
  5. DadOSix

    No blinkers, hazards, or flashers when locking/unlocking

    Another alternative is to program them with the overhead EVIC (info center) if installed on your jeep.
  6. DadOSix

    No blinkers, hazards, or flashers when locking/unlocking

    Welcome! There is a setting in older KJ models that can enable / disable exterior lights Thread 'HOW TO: Tweak your Keyless Entry settings' https://www.jeepkj.com/threads/how-to-tweak-your-keyless-entry-settings.25640/
  7. DadOSix

    Redid brake system but left with a problem

    Exactly why I do my own stuff when i can. Congrats on getting it sorted out!
  8. DadOSix

    2008 Jeep liberty starter problem

    So - Let's focus on turning the engine by hand. How did that go? Easy to turn, hard to turn? Easy then hard, etc? It could be conceivable that several starters are not good right out of the box, especially given the quality of remanufactured parts these days. Next new starter - before you...
  9. DadOSix

    Redid brake system but left with a problem

    Great to hear you got it sorted!
  10. DadOSix

    Mr.Sponge Bob...???

    Make a trip to advance, auto zone, orielly, napa, - whatever - and look for crankcase breather elements. Years back they were all available. Now - we fabricate somehting if the old one becomes saturated. I have used a fish aquarium filter pad (cut up to make many) , hvac home furnace filter...
  11. DadOSix

    Mr.Sponge Bob...???

    Are you talking about the breather element in the air intake box next to the air filter?
  12. DadOSix

    What causes oil leaks? I live in Korea

    Let me jump in with - Depending on the color of the fluid you are seeing - if it is red/pink - it is likely the cooler lines with a little pin hole.
  13. DadOSix

    2008 Jeep liberty starter problem

    So- a lot more detail would help: 1 - please describe why the starter needs replaced to begin with. 2 - why have you replaced the starter 3 x ? 3 - what are you seeing / hearing / experiencing when trying to start the jeep? Give us the whole story and maybe it will lead to a fix. At this...
  14. DadOSix

    Tipm to alternators has extra wire

    Thanks @kiwi_outdoors - better memory than me!
  15. DadOSix

    Tipm to alternators has extra wire

    They are likely grounds. At least the terminal with many wires. Probably low on the left head. Other, I am not sure, but a meter or test light might help ID the issue.
  16. DadOSix

    Redid brake system but left with a problem

    The defective hose will balloon out like an aneurysm - Pressure makes the weak place bulge. There may or may not be a leak, but if the hose is bulging, it needs replaced. There may be 5 hoses in total, one for each wheel and one from the rear brake line from the abs that hits a metering block...
  17. DadOSix

    A Driver's side Thunking Mystery

    Are you sure it is coming from the front end?
  18. DadOSix

    Redid brake system but left with a problem

    Are we losing brake fluid when the engine is running and the pedal goes to the floor? - if yes - I suspect the master cylinder is leaking into the booster. -- quick and dirty test - pull the vacuum hose at the manifold or the booster and see if it is wet inside. --- yes - bad master / no - keep...
  19. DadOSix

    Redid brake system but left with a problem

    Just to add - A brake pedal will be extrememly firm with the engine OFF. With engine running - the pedal action is 'softer' Your tell here is - Does the pedal continue to the floor with engine running. If yes, you have a leak somewhere. If just 'not what it was' before changing the brake...
View older results

Random media

IMG00065 20100111 1045
The beginning 4
KJ gearing
IMG 0073
Jeep In Country2.jpg
Why did this happen? Anyways, new intermediate shaft installed, along with new CV shafts. Stupid clip that was on the ring gear carrier end of the i
DSCN3766
4155.jpg
Local traffic

Latest posts

Members online

No members online now.
Total: 280 (members: 0, guests: 280)
Top