The water is spring fed so it is a constant 72 degrees. I am originally from Va. Beach and back in my younger days used to surf year round. I remember one January day when the temps were in the teens and there was ice hanging off the pier. Now that was cold.
We've been talking about going the last couple of years and we finally made time to go. The place is really cool. We didn't float down on tubes but we rented a canoe and paddled up and down the river. My son and I did swim in the Ginnie and Devil springs and it was awesome. It was a little cold...
I replaced the hose yesterday and that didn't solve the problem. So I took it to Firestone who replaced the radiator back in July.Different store though as we had to have it replaced in NC on our way back from vacation in VA. They discovered that the o-ring on the lower metal tubing coming out...
The clamp didn't solve the problem. Came home tonight and there was a drop under the Jeep. Popped the hood and there was fluid on the hose. I guess the next step is to replace the hose. I'm guessing I can get this at Advanced or Napa. Does anybody know what the inside diameter of the hose is?
I checked the clamp and I can move the clamp and hose with my fingers. I wouldn't think you should be able to do that. I'm going to pick up a new clamp tomorrow and see if that makes a difference.
I noticed a couple of drops of redish clear liquid under the Jeep. I traced it up to the highest point and it appears to be coming from the hose pictured below. The picture is looking straight down from the front of the jeep.I originally thought it was ATF+4 but the hose looks to be coming out...
2 years old but they went ahead and replaced it as it was still under warranty. When they tested it with the new battery the readout said " Check starter circuit for loose, worn or corroded wiring". I am going to take it to another shop and have it tested again before I try replacing anything.
Has anyone ever had to replace their positive battery cable? My Jeep has been a little sluggish starting so I took it to Advanced to have them run the electrical test.The battery was low so they charged it so they could run the complete system check. It came back that there is an issue with the...
I have been having the same issue and was about to swap out the tensioner. I was looking at these two. Anybody have any experinece with either of them, good or bad?
http://www.amazon.com/Goodyear-49246-Tensioner-Idler-Pulley/dp/B000C32JJA/ref=sr_1_1?ie=UTF8&s=automotive&qid=1262492517&sr=8-1...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.