KJowner's latest activity
-
Wrapped up the brake job. Didn't replace my hub assemblies, they felt fine. The KJ rolls again, minus warped brake rotors. Kind of a... -
I have JScan and it can turn the TPMS system off completely so the light never comes on. You can also reset different modules and read...
-
I believe 2007 and 2008 are compatible with each other. The 07 KJ has all the same electronics as the first KK year in 2008. I am on my...
-
KJowner replied to the thread New springs, sad traction.I'm no suspension guru but I'd go with an inch of bumpstop for every inch of lift. I can't suggest anything else, I'm running a very...
-
Ya I guess that makes sense, a longer travel shock that would drop out more, but would the max compressed length be changed then...
-
KJowner replied to the thread New springs, sad traction.Longer shocks on the rear would certainly help keeping the wheels on the ground. You just need a nice heavy CRD up front to ballast it...
-
I could be wrong here but if you’re lifted in the rear wouldn’t you need need longer shocks and bumpstops.
-
So I now have a new set of springs in my daughters 2003 KJ - H&R kit, front shocks are Bilie's left the rear shocks that it had. Put...
-
KJowner reacted to Weazerdogg's post in the thread Transmission problem on KJ 3.7 with 42 RLE gearbox with
Like.
First off, don't know exactly what is going on. Have a 2012 with the 42RLE myself, just had to remove it to replace the torque... -
I put a junkyard one in at the beginning and got about 100,000km out of it. I saved the original, and rebuilt it with a rockauto...
-
Had to replace fuel pump on my '04 Sport. Pulled back the carpet and there was no removable hatch, just an depression where the hatch...
-
KJowner replied to the thread A special Jeep liberty to me.If it's only damaged a head I'd just replace that, the low mileage bottom end should be good for lots more miles & it will cost much...
-
So yea barely used stranded me in the worst possible time of my life
-
KJowner reacted to lfhoward's post in the thread Replacing rack and pinion bushings w/o removing it with Like.
Here is what you need to know!
-
KJowner replied to the thread What did you do to your jeep today?.I often use stainless tywraps for CV boots, easier to fit than the annoying clips!
