-
-
Thank u yeah definitely I went to a junk yard and looked for them again but since I have an aluminum radiator it is not a beard until... -
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.That's kind of confusing on that deal considering the filters on the bottom of both of them the 45 RE and the 545 The only thing...
-
The 2 drawings I found had the 545 upper port as discharge and the 45 as lower port discharge. I don't own a 45 to took at though so I...
-
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.As a fully functional complete unit Yes the discharge is a lower line because it's discharging back into the pan into the transmission...
-
-
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.Well that would be completely correct if you're talking about the pressure line going into the pan that's flowing through the filter and...
-
joshgoble replied to the thread Manipulated PCM.You should be able to go in your scan tool and look up the modification code and go to the Dodge or Chrysler website and see if it...
-
joshgoble replied to the thread Engines & PCMs, Trans & TCMs: Exact part number matching is mandatory.Depending on the year and your equipment you can edit the PCM and TCM an match the parameters to what is needed. If you cannot get the...
-
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.Not much difference between the 42,45,,545 in all honesty whenever you are talking about the oil cooler lines.
-
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.There was no check valve on mine it flow either direction.
-
joshgoble replied to the thread KK TRANSMISSION INLET AND OUTLET?.To the best of my knowledge the low port is the return on the transmission the top port is discharge .lower port it ties into the...
-
joshgoble replied to the thread Replacing the 3.7 with a M111.973 2.3 L.It's a 2000 model SLK I'll be pulling everything out of and at this point it looks like the model W5A 330 and W5A 580 we're used in both...
-
joshgoble reacted to CheddarGau's post in the thread Replacing the 3.7 with a M111.973 2.3 L with
Like.
Motor mounts and cooling/various lines may be your biggest issues. Which transmission will you be using? Manual? That will likely be the... -
joshgoble replied to the thread Replacing the 3.7 with a M111.973 2.3 L.That's a good question I'm not sure. But I'm hoping that the engine mounting plates are identical because this is kind of what I've...
-
joshgoble replied to the thread 2005 AC Help - What am I doing wrong?.It sounds like the expansion valve possibly was over crimped when it was put in or you didn't get all the trash out of the system and it...
-
joshgoble replied to the thread HELP ME ON OIL TRANSMISION LINES!!.Well you could go to a wrecking yard and remove them from a vehicle you could buy a transmission line flaring tool and build your own ...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
![5231321 3[1]](/data/xfmg/thumbnail/3/3527-7710d30b57623b2deaa3a85c92977dda.jpg?1623784620)
Members online
No members online now.