Recent content by JBDive

Problem is more of I'm not sure what part number or part naming in order to search correctly to find the part. I had a service manual at one time, hoping it is in there somewhere, when I find it.

Molded air hoses on 2002 Jeep Liberty have split. Both on passenger side, one goes from air intake on top of engine to somewhere while the other comes off the oil filler bowl. Sorry, I've only taken a breif look at them as mechanic pointed them out after doing some other work. Ideas?

Yeap, finally found a video and that is what they did and it works.

Got it. Found a video that suggested using a ratcheting strap to wrap around diff and upper control arm, tighten then use jack under diff. Had just that last quarter inch to go and what do you know, slap on the strap, placed a board under differential, towards the front half so as I rose it up...

Yeah we have rocked the diff a good bit placing a jack with board under various locations to swing it back and forth. I really only gave it about 30 minutes of screwing around with it before calling it for the night as I spent most of the day on another task and was beat up. Going to start over...

Tried to replace the upper arm today and things went so so. I got the old arm out really quickly and was feeling great about my progress then got stuck putting the new arm back in. Had to take a break for the afternoon to do something else then on getting back to the job I was able to get it...

So finally got everything back together. Here is a review for anyone that finds this thread in the future. 1. The hole and **** style is only used in post March 2006 and 2007 models. Jeep has a service bulletin on this design where if they break, Jeep would replace the regulator and window with...

I've done 4 regulators so far, the worm gear design they used is **** but each of the failures I have seen are in the regulator motor gearing, never the regulator clip that these 3rd party fixes, fix.

OK, got the old one out but I cannot get the new one to pop the retaining **** thru the glass hole. It seems as if the glass is a few millimeters off the base but even then the **** has a downward lip on it so the glass would have to go lower in order to angle the **** or I have got to pry the...

Will give that a try on Tuesday after new part comes in. Dorman part picked up at local auto store, specifically for 2007, is the 2002-2006 version. Thanks.

I've done a number of window regulators but trying to do my son's 2007 and first off the replacement part from Dorman is wrong, the 07 has a hole in the window with a *** that sticks through it from the regulator slide. How the heck do you disengage that plastic **** from the window? (really...

Had the key that I was able to program cut this AM and it works fine, disables the immobilizer as it should. Will take apart the 2nd key from Amazon and double check it is put together right and try one more time on programming it. No way I am paying $150 for a damn OEM key, I'll program 6 POS...

2007 Liberty Sport One of the remotes just freaked out and stopped working. I ordered a pair from an Amazon seller with tons of great reviews. Tried programming them over and over using the included instructions then decided, hey, let's see what the manual says. After going through the process...

Drivers side, rear window just stopped working. I do not hear any motor sound form the regulator at all. I have not pulled the door panel as of yet. All other windows work. Ideas: 1. Front window 4 way switch? 2. Regulator 3. wiring unplugged or other 4. Good luck figuring it out Just trying...

Yes I can key fob open the liftgate. Ihave FSM's manuals, can't say I've seen anything on that.