Does it matter what TCase you have? Or does the only part # I saw posted " 5083 138AA" work for all. TCase options on the liberty? I too will need to replace this part and it will be for a 04 Libby Renegade with the np242 FullTime option. I just wanna make sure before I order the part thanks.
Thanks. Does it ride on a gear tooth or something? How else would it jump and get only 1 selection off? Do you think I can reposition it or will it definitely need a new one?
Exactly what it says in the title. I used my wife's Libby the other day and needed to use 4wheel drive. The dash indicator came on correctly as I cycled through the gears from 2wd, 4parttime, 4fulltime, neutral, 4lo. But then cycling back down to 2wd somehow the dash indicator got off from the...
If its a Shock then why does Bilstein call it a Strut? And why does every other manufacturer call the Fronts Struts also? When I was looking online to placed my order all the Fronts were called Struts the Rears are Shocks.
The boot has a metal sleeve in it that rest on a certain spot on the Strut Shaft, so when you install the top plate onto the Strut Shaft it keeps you from over tightening the center nut. I would think if you didn't run the boot then the center nut could be way over tightened because then the...
Well shockwearhouse is sending me 2 new boots for the Bilstein Struts. Hopefully they will be correct and I can get my wifes suspension done.
Also I don't know what is up with quality control here lately but I also ordered a new Blower Fan resistor for my wifes libby because her fan stopped...
Well took my Xj to a nearby trail,... well somewhat nearby, about 2.5 hrs away. and did a little wheeling on Saturday.
My Xj is on the right my Cousin-in-Law's is on the left.
I sent an email to shockwearhouse were I purchased them from to see what they can do, I guess I'll go ahead and send Bilstein an email also. Maybe I can get some shocks for my troubles. Lol. Worth a shot I guess.
Well I found out my problem. I had to tear both the Struts back down and found out the boot cover that slides down over the shaft, one is wrong right from the get go. The little sleeves that are inserted in the boot cover one of the sleeves wasn't bored out all the way. So when you slide it...
Well I tightened the spring down alot farther and pulled the top plate back off, checked the dust cover its seated all the way down as far as it will go, I reapplied the top plate and tried screwing the nut back down again but that's as far as it will go it won't go any farther. I actually had...
This is what i'm talking about, in his picture you can see nut much threads are showing, I guess I didn't have the spring compressed as far down and when I screwed on the top center nut it got tension pretty quick and I torqued it down to 20-30 foot pounds.
In this picture you can see i'm...
Ok I rented a Strut Compressor from Advance Auto. I've compressed one Brand new Spring down already and installed it onto the New Bilstein Strut. When I installed the top washer and nut onto the top plate after torquing it down to around 20-30 foot pounds there is about 2 threads showing off the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.