-
-
DOld CRD springs will be dead, they were under rated for the weight of the diesel, mine had sagged so much it was almost on the bumpstops...
-
DDave_too replied to the thread Do I Have to Calibrate Speedo Again after Regearing to 4:10?.Ring and pinion that is.
-
DDave_too replied to the thread 2007 lift recommendation help.Definitely take a look at the isolators at this point. Hard to imagine they don’t need replacing and they’re relatively inexpensive.
-
DDave_too replied to the thread Do I Have to Calibrate Speedo Again after Regearing to 4:10?.Where did you run down the rack and pinion for the front differential?
-
DDave_too replied to the thread Can I Fit ANY 4.10 Gears by Just Adding ANY Steel Dana 30 Carrier into the Dana 30a “Super”?.Missed this. The part number I sent earlier is for a KJ. Didn’t realize we were talking KK.
-
DIf it is the anti-theft that is the culprit, it will start and run for about a second or two, then die. This is if it is not sensing...
-
DDave_too reacted to CheddarGau's post in the thread Do I Have to Calibrate Speedo Again after Regearing to 4:10? with
Like.
If you went with bigger tires, then it won't actually be out by much. Stock tires with 4.10 will be out. Bigger tires with 4.10 will get... -
DDave_too replied to the thread Can I Fit ANY 4.10 Gears by Just Adding ANY Steel Dana 30 Carrier into the Dana 30a “Super”?.5066085AA-SP is the part number you're looking for to fit a Dana Spicer 30a super. The ring and pinion sets just don't exist any more...
-
DDave_too reacted to Ian Glass's post in the thread Do I Have to Calibrate Speedo Again after Regearing to 4:10? with Like.
Your speedo and odo will be out. Best to get hold of a Garmin watch or Garmin GPS device and find a clear bit of highway. Then drive at...
-
DDave_too replied to the thread Do I Have to Calibrate Speedo Again after Regearing to 4:10?.I Understand I am late to this party. You might be able to find someone to tune it, but not all those folks know what they're doing and...
-
DDave_too reacted to eric1514's post in the thread I have a 2004 Jeep Liberty and went to jump start it with my welder, have used it before, but for some reason too many volts went through it this time with Like.
Have you tried reading any codes? A simple code reader can be had cheap. You say the cluster doesn't work so you can't tell if you...
-
DWouldn’t it be great to have working air conditioning? 97°F here today…
-
DDave_too reacted to rustydread777's post in the thread What did you do to your jeep today? with Like.
Oil change, cleaned 24 years of skid plate grime, and recovery hooks installed. Next week, fuel injector rebuild and spark plugs.
-
DDave_too reacted to Shankster's post in the thread Changed starter in 06 KJ and it still wont start with Like.
A few random thoughts: I'm assuming you've retraced and checked all the electrical connections - a common trouble area is where your 3...
-
DWhy arent the xj's in there? Unless i get a free skid plate, im taking neither the zj or the kj in for that recall. I like where the...
-
-
Loading…
-
Loading…
