Rear upper control arm...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BrianB44146

New Member
Joined
May 5, 2020
Messages
5
Reaction score
0
2006 Jeep Liberty purchase a few months ago. Replaced a bad upper control arm while doing a two and a half inch lift. Have the Jeep on a lift today I noticed the upper bushings are torn and falling apart already. Is this common when the Liberty is lifted only 2.5 inches?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
The cheap ones are pure junk from the get go, go at the very least Moog, MOPAR is way better
I had to run one of the cheaper ones years ago due to backorders on MOPARs, lasted a couple of months
 

HoosierJeeper

Gold Supporter/Admin
Staff member
Administrator
Joined
Jan 20, 2009
Messages
20,855
Reaction score
266
Location
Western WI
FWIW, I'm running a Napa Supreme one (think it's made by spicer), one with the blue boot, been there a few months and on a few off road trips, it's been good.
 

JeepJeepster

Full Access Member
Joined
Dec 15, 2004
Messages
8,904
Reaction score
292
Location
Dem hollers in Ky
The MEVOTECH CMS25156 has a blue boot also and its half the price of the napa unit. Wonder if its the same thing?

Moog bushings are just $21 on amazon, not sure how tough it is to get the old ones out. Ive got a press so I may give it a go.
 

HoosierJeeper

Gold Supporter/Admin
Staff member
Administrator
Joined
Jan 20, 2009
Messages
20,855
Reaction score
266
Location
Western WI
The MEVOTECH CMS25156 has a blue boot also and its half the price of the napa unit. Wonder if its the same thing?

Moog bushings are just $21 on amazon, not sure how tough it is to get the old ones out. Ive got a press so I may give it a go.
Yep, that's the same one. Oreillys has it too. I just got it locally since I figured if it breaks it'll be easier to swap out. I think most people have issues getting the bushings out, the arm just bends.
 

65Corvair

Full Access Member
Joined
Sep 1, 2015
Messages
149
Reaction score
272
Location
Iowa
The MEVOTECH CMS25156 has a blue boot also and its half the price of the napa unit. Wonder if its the same thing?

Moog bushings are just $21 on amazon, not sure how tough it is to get the old ones out. Ive got a press so I may give it a go.

I tired to press them out with a ball joint press a few years ago, and it ends up crushing the control arm. Let me know if you have better luck.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
The MEVOTECH CMS25156 has a blue boot also and its half the price of the napa unit. Wonder if its the same thing?

Moog bushings are just $21 on amazon, not sure how tough it is to get the old ones out. Ive got a press so I may give it a go.
Not worth trying
 

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,410
Reaction score
1,134
Location
Weiser, ID
I did it successfully once with a shop press, but it was finicky to say the least. I wouldn't bother or suggest anyone else does. It was tough keeping it from collapsing like a pop can and mine is rust free.
 

XWrench3

Full Access Member
Joined
Sep 30, 2020
Messages
182
Reaction score
41
i have never done a lift on anything. but i have worked with a few guys that did. of course that was 20 years ago, so things have changed. but it seemed like a lift kit meant finding answers for things that went wrong because of the lift. can you maybe make a sturdy spacer that would allow the original geometry to be maintained?
 

Abbas

New Member
Joined
Nov 22, 2020
Messages
10
Reaction score
1
Location
Hercules, Ca. USA
I have Moog bushings that have proven its durability for me. I installed 2' inch lift kits and two years ago and I decided to replace bushings for added peace of mind. It's just around $21 at Amazon. Another one to consider is Mevotech parts if you will be replacing kits. There's a link article comparison between the two, those are good aftermarket parts for Jeeps.
 

Offroad Bob

OffroadBob
Joined
May 26, 2021
Messages
81
Reaction score
42
Location
Chattanooga, Tn
FWIW, I'm running a Napa Supreme one (think it's made by spicer), one with the blue boot, been there a few months and on a few off road trips, it's been good.

I replaced the original upper arm with a NAPA high $ too. That was last Nov and it’s already bad. I ordered a complete rear setup from Iron Mtn and it arrived today. Going to install Saturday!!
 

Latest posts

Members online

Top