KK Lift parts since JBA stopped selling them

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chandler Solon

New Member
Joined
Jan 29, 2020
Messages
19
Reaction score
0
Hey Guys,

I was trying to put together a lift kit part list for my 2012 Liberty KK. This is what I gathered from here and FB. Can you let me know if I'm forgetting anything?

I was going to go with the RC spacer kit and still might.

Front:
  • Bilstein 5100 Series Ride Height Adjustable struts. (stock setting, for now, Can adjust for the bumper in the future.)
  • OME 2927 coils
  • JBA UCAs (not sure if these are necessary at this height)
  • Terraflex bump stops
Rear:
  • Bilstein 5100 shocks with KJ boot
  • Bushings for shocks from JBA
  • OME 731 springs
  • Terraflex bump stops (not sure which ones. Cant find them)
I've never been offroading but want to start
Is it worth going this route?
Can I tackle tougher terrain with this setup rather than the spacers?
Am I missing any parts?


Planning on running 165/70r16
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Hey Guys,

I was trying to put together a lift kit part list for my 2012 Liberty KK. This is what I gathered from here and FB. Can you let me know if I'm forgetting anything?

I was going to go with the RC spacer kit and still might.

Front:
  • Bilstein 5100 Series Ride Height Adjustable struts. (stock setting, for now, Can adjust for the bumper in the future.)
  • OME 2927 coils
  • JBA UCAs (not sure if these are necessary at this height)
  • Terraflex bump stops
Rear:
  • Bilstein 5100 shocks with KJ boot
  • Bushings for shocks from JBA
  • OME 731 springs
  • Terraflex bump stops (not sure which ones. Cant find them)
I've never been offroading but want to start
Is it worth going this route?
Can I tackle tougher terrain with this setup rather than the spacers?
Am I missing any parts?


Planning on running 165/70r16


Do not got with any spacer lift
and stay away from most Fakebook suggestions
At 2.5 inches which is what you will get from 927/948 combo you do not need JBA UCAs but are a great addition
there are not any Teraflex rear bumpstops, use two hockey pucks per side bolted down to the lower spring perch
I assume you meant 265-70-16s instead of 165-70-16s

for the rear you need to use rear shocks for a 99-04 Dakota CLUB CAB 4x4
front uses stock shocks which are same 02-12
I would not suggest the adjustable fronts, just get Bilstein for the front
SHOCKS DO NOT provide lift, springs do
 

Chandler Solon

New Member
Joined
Jan 29, 2020
Messages
19
Reaction score
0
Awesome.

So since my OEM front struts are good, all I need is

927 springs for the front and 948 for the rear.
Teraflex bumpstops
Hockey pucks ??
Rear shocks (size for a Dakota club cab 4x4 and not a KJ)
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Awesome.

So since my OEM front struts are good, all I need is

927 springs for the front and 948 for the rear.
Teraflex bumpstops
Hockey pucks ??
Rear shocks (size for a Dakota club cab 4x4 and not a KJ)
Whoops you have a KK so yes you were right on the 731s for rear
Yes you want longer shocks for the rear which the 99-04 Dakota Club Cab 4x4 are the right length
and yes hockey pucks , work great have used them on over 60 Liberty lifts along with many others on here and other sites
 

Chandler Solon

New Member
Joined
Jan 29, 2020
Messages
19
Reaction score
0
I'm having a hard time wrapping my brain around the fact that I can lift the front with just springs and OE struts.

If I wanted to upgrade the front struts, do you have any suggestions?
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
I'm having a hard time wrapping my brain around the fact that I can lift the front with just springs and OE struts.

If I wanted to upgrade the front struts, do you have any suggestions?
We do not have struts, struts are used on cars with no upper control arms
SPRINGS, read this SPRINGS provide lift , not shocks
 

Chandler Solon

New Member
Joined
Jan 29, 2020
Messages
19
Reaction score
0
Thank you. It looks like I will be going with the following for my 2012 KK:


  • ARB 927 Old Man Emu Front Coil Springs
  • ARB 731 Old Man Emu Rear Coil Springs
  • Bilstein 24-139168 Front Shock Absorbers (4WP has a strut for that number. Amazon has a shock)
  • Bilstein 24-185240 4600 Series Rear Shock Absorbers ( or should I go with the 5100)
  • Teraflex 1903200 Front Bumpstops for 02-07 KJ
  • 4 Hockey pucks, 2.5" 3/8" bolts washers
  • JBA Bilstein bushing kit.
I will probably get JBA UCAs in the future.

Any feedback is welcomed

Thanks.
 
Last edited:

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
shockwarehouse has the ones I use on most customers 185859s ( bilstein)
on my own 03 running the 24-185660's currently

lock washers on bolt is all you need
 

Chandler Solon

New Member
Joined
Jan 29, 2020
Messages
19
Reaction score
0
Thank you Tommudd for all of your help. The Liberty community would be lost without your advice.

I will go with the 24-185660's on the rear and grab some lock washers.
 

Latest posts

Members online

Top