Latest activity
-
I made my own wheel chock system, this morning. -
KHello! Got a good deal on an 06 Liberty Sport 4x4 last year with blown head gaskets. I had the heads done and cleaned/replaced...
-
David A. Warr replied to the thread Rusted E16 external torx bolts for wheel bearing..That is great. I found a Limited Edition 2004 with just about 130,000 Kms in 2019. Only $2900. Still going strong. -
DDefCon2 replied to the thread What are my locker options currently for an 03 with SelecTrac?.A lunchbox locker is a generic term for a locker that engages by itself by use of an internal planetary gear (or similar) when one wheel...
-
MMhalloran replied to the thread Rusted E16 external torx bolts for wheel bearing..I had to put a new engine in at 78k miles due to known valve seat issues in heads. Now it’s been running has 148k & going strong, knock wood
-
MMhalloran reacted to David A. Warr's post in the thread Rusted E16 external torx bolts for wheel bearing. with
Like.
I can remove the key from the three of mine while they are running. I thought that feature was pretty common on most cars. -
MMhalloran replied to the thread Rusted E16 external torx bolts for wheel bearing..I hear you yes. Have no choice because I can’t really afford another new car payment plan every month
-
MMhalloran reacted to KJowner's post in the thread Rusted E16 external torx bolts for wheel bearing. with Like.
We are a selection of stubborn old men keeping our obsolete Jeeps rolling ;)
-
Don't use single pack unless you want to repeat the job regularly! Proper 2K clear lasts well. -
CherokeeLiberty replied to the thread What did you do to your jeep today?.I made my own wheel chock system, this morning. -
-
Mmike replied to the thread What are my locker options currently for an 03 with SelecTrac?.Excuse my ignorance, what are "lunchboxes"?
-
Bet that made a big difference to the ride. -
lfhoward reacted to Puddle Jumper 2.0's post in the thread Front LCA bushings replacement with Like.
I recently rebuilt all of my suspension front and rear along with I&O tie rods, hub assemblies and CV shafts. Monroe Quickstruts (which...
-
MC replacement isn't TOO bad. since you don't have ABS it'll be a lot easier (more room). just make sure you bleed the MC *BEFORE*...
-
Thank you I love my Jeep. I thought maybe it could be fixed but I needs some advice to help me make the decision.
![IMG 20120722 175932[1]](/data/xfmg/thumbnail/5/5712-f5086c4519a21166faa186544aa78f31.jpg?1623784626)
