Stock center caps on aftermarket wheels?

[Joe200man]

May be a dumb question but how does everyone mount the stock center caps on aftermarket wheels? I'm guessing they don't have the holes for the screws?

 

[CzarKJ]

Nah they have plastic clips that hold them in place.

 

[John3seventeen]

My 03 has screws - no clips

 

[Porkchop]

Screws on my 03 05 & 07 with plastic pegs that center it on the wheel as well.

 

[4x4kayak2112]

My 06 is held on by the lug nuts...

Sent with the power of children's screams!!!

 

[Joe200man]

So there's more than one kind? I've only ever seen the ones held on with 3 screws

 

[4x4kayak2112]

So there's more than one kind? I've only ever seen the ones held on with 3 screws

Yep....mine come off with the lugs, but they are not attached to the lugs.

Sent with the power of children's screams!!!

 

[CactusJacked]

Probably would help if you told what year yours is, and if you're referring to the steel wheels with a larger center cap held on by the lug nuts, or aluminum wheels that have a small diameter cap that snaps in.

 

[John3seventeen]

Yeah that might help, but I don't think you could use those small centercaps for what he is talking about.

 

[Joe200man]

Yeah that might help, but I don't think you could use those small centercaps for what he is talking about.

Exactly. I'm talking about the center caps people mount on wheels such as soft 8's. I'm guessing they are drilling holes in their wheels but I'll pass on that lol

 

[4x4kayak2112]

Exactly. I'm talking about the center caps people mount on wheels such as soft 8's. I'm guessing they are drilling holes in their wheels but I'll pass on that lol

I guess mine are rare, they dont bolt down....wanna buy them? Lol



Sent with the power of children's screams!!!

 

[WICKED KJ]

I used windshield adhesive

 

[Joe200man]

I used windshield adhesive

How is that holding up? I'd rather do that then drill out my wheels

 

[4x4kayak2112]

How is that holding up? I'd rather do that then drill out my wheels

Hey joe......pm sent

Edit: mine are just like this (that long link).....but I had the KJ steel rims, all you do is cut the nipples off (that helped it be "truly" centered and use your lugs on your cragers to hold it on, theres a how too on here,

http://www.ebay.com/itm/Jeep-Wrangl...d=100005&prg=1088&rk=3&rkt=4&sd=171234809374&

Sent with the power of children's screams!!!

 

[WICKED KJ]

they are holding up well. I used 3 little dabs of it on the screw holes and everything is still there

You must be registered for see images attach

 

[Joe200man]

they are holding up well. I used 3 little dabs of it on the screw holes and everything is still there

You must be registered for see images attach

What size wheels are those?

 

[WICKED KJ]

Toyo 15x8 with 4" BS with 31-11.5-15. its an old photo but I still have the same wheels

 

[Joe200man]

Toyo 15x8 with 4" BS with 31-11.5-15. its an old photo but I still have the same wheels

Do you have any other front or back pics of them? I haven't seen to many pics of 8" wheels with 4 inch bs

 

[WICKED KJ]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[WICKED KJ]

they stuck out about 1 1/2 at all 4 corners