retmil46
Full Access Member
First, I have to move from NC down to San Antonio back in April due to this sad economy. Now LOST goes down and I have to move to another KJ forum.
Ah well, from what I've seen so far, looks to be a much more helpful forum - already found a how-to thread for one of my pet desires - power seats!!!
'05 CRD Sport, Stone White, owned since new Sept 05, coming up on 44K miles. Inmotion Stage II tune; Suncoast TC, new design oil pump, and Transgo shift kit in ******; greaseable heavy duty u-joints from Tom Woods Custom Driveshafts; aux ****** cooler under the front bumper; gasser V6 airbox intake mod; Provent CCV filter; 4 psi centrifugal lift pump from Kennedy Diesel; original fuel filter replaced with Stanadyne FM100 30 micron primary and Cat 2 micron secondary filters; fuel cooler installed in fuel return line; backup light mod per eurekaboy/Stan Wright; aftermarket trailer tow setup; aftermarket lower ball joints; Samco Sport intercooler hoses; factory skid plates; Fumoto oil drain valve and oversized oil filter; Cooper Discoverer ATR 245/70/16's. Upcoming planned mods - Isspro Performax gauge setup w/ EGT, Boost, Oil Pressure, Trans Temp, and Voltmeter.
My other diesel, still back in NC - 87 MB 300D Turbodiesel sedan, 200K miles.
Myself - Retired Navy Enlisted back in '97, 12 years working at the Freightliner Cleveland NC plant, now working at the thermal energy plant at UTSA in San Antonio.
Ah well, from what I've seen so far, looks to be a much more helpful forum - already found a how-to thread for one of my pet desires - power seats!!!
'05 CRD Sport, Stone White, owned since new Sept 05, coming up on 44K miles. Inmotion Stage II tune; Suncoast TC, new design oil pump, and Transgo shift kit in ******; greaseable heavy duty u-joints from Tom Woods Custom Driveshafts; aux ****** cooler under the front bumper; gasser V6 airbox intake mod; Provent CCV filter; 4 psi centrifugal lift pump from Kennedy Diesel; original fuel filter replaced with Stanadyne FM100 30 micron primary and Cat 2 micron secondary filters; fuel cooler installed in fuel return line; backup light mod per eurekaboy/Stan Wright; aftermarket trailer tow setup; aftermarket lower ball joints; Samco Sport intercooler hoses; factory skid plates; Fumoto oil drain valve and oversized oil filter; Cooper Discoverer ATR 245/70/16's. Upcoming planned mods - Isspro Performax gauge setup w/ EGT, Boost, Oil Pressure, Trans Temp, and Voltmeter.
My other diesel, still back in NC - 87 MB 300D Turbodiesel sedan, 200K miles.
Myself - Retired Navy Enlisted back in '97, 12 years working at the Freightliner Cleveland NC plant, now working at the thermal energy plant at UTSA in San Antonio.
Last edited:
