Quick question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

libertyman

Full Access Member
Joined
Jan 28, 2007
Messages
111
Reaction score
0
I was thinking of adding the tubular sidesteps to the liberty, mine is a 03, I found a wrecked 07 with the tubular sidesteps, will they bolt right on my jeep?
 

hyde

Moderator
KJ Supporting Member
Joined
Feb 15, 2006
Messages
7,347
Reaction score
7
I don't think even the original ones will bolt right on. You would need to drill. Also 05+ has that weird plastic blob at the bottom, not sure if that'll be on the way.
 

Corwyyn

Full Access Member
Joined
Feb 5, 2005
Messages
2,524
Reaction score
7
Location
Southeast of disorder...
I don't think even the original ones will bolt right on. You would need to drill. Also 05+ has that weird plastic blob at the bottom, not sure if that'll be on the way.
If they are the factory rails, and if they didn't change the mount locations between years they should work. You'll need some of the infamous 'nut-serts', but all the holes you need should already be in the frame. As for the plastic trim pieces under the rocker panel, they'll pop right off.
 
Top