Part ID and tubing sizes?

[gnp.hiker]

Not quite sure of the part in question and rubber tubing sizes that has dry rotted and needs replacement. The third image shows two different tubing sizes.

Thanks in advance for any assistance!

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

 

[streetglideok]

First pic should be the evaporative system purge solenoid. As far as sizes go, if you own a set of wrenches, use them to gauge the size.

 

[gnp.hiker]

Thanks for the part ID and good idea on checking the sizes.

Seems its a standard 1/4" and 3/8" ID (inside diameter) fuel hose sizes ... off to parts house.

updated: actually is was neither, its 5/16" fuel hose size.