JeepJeepster
Full Access Member
Got my draw tite hitch in today, its the 7500/750.
It had some damage on it but ill live with it.
Heres all the stuff i got.
The back panel is very easy to take off. After popping the bottom strip off, the side panel just pops off and the wiring is tied up on the side.
The wiring is ran through a grommet in the floor that takes it out to the hitch. This is not the wiring that hooks up to ur tail lights, it actually hooks up where the factory wiring harness does. You have to ground it and run a 12v wire all the way to the battery that it comes with, it has a 20A fuse also.
I ran the 12v wire out the grommet with the hitch wiring and under the jeep following the brake lines, be sure not to get it close to moving parts or the exhaust, I also put wire loom around it, u can see some of it in this pic. I put 5 feet of it from the battery back, and 5 feet from the rear up. Right in the middle i didnt see any need for any.(plus it came in 5foot packs)
It came with a little box that dosent let things get shorted out, i dont know how it works but i stuck it here with some double sided tape.
Heres the final product. lol as u can see its dark out-side now, that wiring took alot longer than i thought it would, plus putting the hitch on sucked. Its alot easier to have help, trust me.
You must be registered for see images attach
You must be registered for see images attach
It had some damage on it but ill live with it.
You must be registered for see images attach
Heres all the stuff i got.
You must be registered for see images attach
The back panel is very easy to take off. After popping the bottom strip off, the side panel just pops off and the wiring is tied up on the side.
You must be registered for see images attach
You must be registered for see images attach
The wiring is ran through a grommet in the floor that takes it out to the hitch. This is not the wiring that hooks up to ur tail lights, it actually hooks up where the factory wiring harness does. You have to ground it and run a 12v wire all the way to the battery that it comes with, it has a 20A fuse also.
You must be registered for see images attach
I ran the 12v wire out the grommet with the hitch wiring and under the jeep following the brake lines, be sure not to get it close to moving parts or the exhaust, I also put wire loom around it, u can see some of it in this pic. I put 5 feet of it from the battery back, and 5 feet from the rear up. Right in the middle i didnt see any need for any.(plus it came in 5foot packs)
You must be registered for see images attach
It came with a little box that dosent let things get shorted out, i dont know how it works but i stuck it here with some double sided tape.
You must be registered for see images attach
Heres the final product. lol as u can see its dark out-side now, that wiring took alot longer than i thought it would, plus putting the hitch on sucked. Its alot easier to have help, trust me.
You must be registered for see images attach