Low beams not working

[Clint3240]

I have 2008 Jeep Liberty and the low beams are not working, I can’t locate a fuse or a relay for it in the panel, high beams and every other light works fine. Any suggestions are aprecicated. I have a Haynes manual and that is no use

 

[Billwill]

The KJs have separate fuses for high and low beam located near the bottom of the interior fuse panel. Also the KJs have a High Beam Relay on the front of the fuse panel and a Low Beam Relay on the reverse side among other identical relays...I have no information regarding the KKs!

The Multifunction Switch on the KJs fail a fair amount...do not know if they fixed it in the KKs.

Have you checked/replaced the bulbs?

 

[Clint3240]

I’m not sure what your talking about kk and kJ? But no I did not check the bulbs, I find it very rare to have both of them blown

 

[uss2defiant]

reiterating what Bill mentioned.

1. use your owner's manual to find where the appropriate fuse(s) are.
2. check the bulbs whether the low beam filament is blown.