how to replace egr valve on a 2.8 crd 05?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KJowner

Full Access Member
Joined
Oct 20, 2022
Messages
912
Reaction score
534
Location
Uk
That's unlikely to be the EGR, no start when hot is classic crank angle sensor or a fuel system issue.
Did the garage tell you it was an EGR fault? If so I'd that the car elsewhere!
 
Last edited:

jwilinski

Member
Joined
Jul 1, 2023
Messages
32
Reaction score
4
That's unlikely to be the EGR, no start when hot is classic crank angle sensor or a fuel system issue.
Did the garage tell you it was an EGR fault? If so I'd that the car elsewhere!
The engine light code is P0401 which is EGR. Here’s what the dealership said:
“The tech has found the egr does need to be replaced, Is your extended warranty valid? If not the repair is $1676”.
 

KJowner

Full Access Member
Joined
Oct 20, 2022
Messages
912
Reaction score
534
Location
Uk
Owch, as I said above, it's highly unlikely that the EGR will be the cause of the poor hot starting. $1676 is insane money for the valve, if you can't pull it and clean it yourself it can be mapped out, there are people on the Lost Jeeps site who could help you, I believe it's a bit more difficult now because your government has interfered....
 
Top