How to connect backup camera to reverse light on drivers side

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OxleyT6899

New Member
Joined
Jun 22, 2022
Messages
1
Reaction score
0
Hi! I have a 2008 Jeep Liberty. I just installed a third party double din touch screen stereo that came with a backup camera to install. I’ve run the wires from behind the radio to my back tail lights. I know I need to connect the red and black wires from the back up camera to the reverse light but I’m not sure which wire to connect it to. Seems like everywhere I look online has different wire colors. I’ve attached what my wires look like below. Thank you in advanced.
 

Attachments

  • A4236373-7930-4835-BA8B-EA19FEAAB113.jpeg
    A4236373-7930-4835-BA8B-EA19FEAAB113.jpeg
    207.9 KB · Views: 16
  • 01AF770D-DF48-43CC-96B0-C849CA797258.jpeg
    01AF770D-DF48-43CC-96B0-C849CA797258.jpeg
    195.7 KB · Views: 16
  • CC771A3B-D677-49C5-A132-B06B7CF25671.jpeg
    CC771A3B-D677-49C5-A132-B06B7CF25671.jpeg
    213 KB · Views: 15

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,358
Reaction score
3,164
Location
Bellevue NE
Stick a paper clip into one slot of the female connector on the driver side. Have a helper step on the brakes. Measure DC voltage between paper clip and a chassis ground. Wash, rinse, repeat till you know which is the hot. Most likely is one of the white with green stripe.
 

Latest posts

Members online

Top