GKreamer
Full Access Member
I purchased AutoLite Double Platinum plugs and was going to replace the original ones. I have over 96,000 miles and I know that is too long too wait. I decided to start with the middle driver's side plug. Pulled the coil and got my socket over the plug with a 12" extension. Attached the ratchet but I cannot get the plug to budge. I put some pretty good pressure but nothing. Can I spray PBBlaster down there to try to loosen it up?
Once the first one I chose did this, I decided to ask before I messed something up.
Thanks,
George
Once the first one I chose did this, I decided to ask before I messed something up.
Thanks,
George