4WD noises and not engaging 03 liberty

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Perps

New Member
Joined
Dec 11, 2015
Messages
13
Reaction score
0
Location
South Lake Tahoe
I think I found the problem guys...hah.

Jeep drives fine without the 4wd shaft so I don't think any other damage has been done it.

Part store only sells the entire shaft. Does this part look recognizable to anyone?
 

Attachments

  • 1213151652a.jpg
    1213151652a.jpg
    101.3 KB · Views: 23

M38 Bob

Full Access Member
Joined
Jun 23, 2015
Messages
1,069
Reaction score
3
Location
Arkansas
I have a customer with a Liberty, couple months before I joined this sight, or bought one myself his took a dump and all I could find was remanufactured from local parts stores.

BOHICA price! He OK'd the repair, but next time one comes in (or my own) I'll be checking the repair kit out.

Bob
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,643
Location
Southeastern Ohio
I think I found the problem guys...hah.

Jeep drives fine without the 4wd shaft so I don't think any other damage has been done it.

Part store only sells the entire shaft. Does this part look recognizable to anyone?

Man you ran it until there was nothing left of it
Gave you the place to order from and part number in a previous post
Just order it for 50-60 bucks shipped and replace MUCH cheaper
 

robert.janowski

Full Access Member
Joined
Nov 3, 2015
Messages
25
Reaction score
0
When you go to put it back in. You must put the rear joint on top of the transfer case first. Then the front into the axel. Then bring down the back to go into the transfer case.

Sent from my SM-G900V using Tapatalk
 
Top