suspension

Current Lift: Front Spring: ARB OME 2927 Strut: ARB OME 90009 Top Spacer: 3/8” Spacer Clevis Lift: 4 on Driver’s side/3 on Passenger’s side (Conduit Nuts) Upgraded control arms to help with alignment & eliminate spring contact Height Measurements: FL = 21.5” & FR = 21.5” Rear Spring: RRO...

Hey all, If any of you have old KK front suspension parts lying around that you want gone, let me know. I'm interested in 3d scanning the main front suspension components to CAD up a model of the Liberty This will be my reference for designing a long travel kit to match up with a Fox Coilover...

Happy Saturday. Seen some posts on bump stops but pictures were lacking. And YouTube only has the fronts. Here are some photos for ease for anyone in the future so you can confidently do it! Note: my Jeep is a commuter + family hauler car, no lift, and all suspension replacement has been...

I have an 2wd '07 Liberty with 142k miles on it and, needless to say, the suspension is long gone. I have some meatier size 235 tires and 2in hubcentric spacers as a side note. The suspension bottoms out over every little bump and it kills me inside when i hear it. Tires like to rub when hard...

Hi, New to the KJ but I want to replace suspension parts. Mine is not low mileage, probably around average for a 2006. Got about 2 1/2 lift. I'm in Minnesota and have seen reports, postings, whatever about various failed parts from corrosion. I just want to replace them all and not worry about...

While I've posted before in other conversations that I desired to do a lift & add an ARB bumper on my '04 KJ, reality closed in. I'm going to be using the Liberty a lot to haul my elderly parents back & forth to ever-increasing medical appointments. So no real lift to speak of as they need to...

Hi Guys, I have an '06 Liberty CRD. My rear upper and lower control arms are shot and I want to replace them with something stronger. I've seen a bolt-on 4-link system from JBA that would be awesome but they no longer carry it. the JBA system is seen here...

BEFORE WE GET STARTED: I’ll be driving this vehicle across the country (~3000mi) with about 300lbs worth of workout equipment in the car... will these specs be suitable?) I don’t necessarily want to lift my suspension, but according to everyone here (namely tommudd,) it’ll be the biproduct of...

I have a few black risers under my rear and front springs which makes me think Silvy is lifted. (See attached photos) I need to buy new rear absorbers. The current ones are the model 52088673AC and I was wondering if I should use the same size absorbers and springs or go a bit burlier as I’m on...