Search results

2005 Jeep Liberty totaled in November 2014 Parts Note: I know this is not the place to post this but I cannot post this in the for sale forum as aparrently I have no permissions. Since I no longer have the Jeep it is unlikely I will ever do enough posts to get them. Forgive me. Well back...

Actually, If you follow where the air intake on a stock gas KJ comes from it is mostly from under the hood between the airbox and the passenger fender. The stock diverter in front of the stock snorkel pulls air from that little space in the sheet metal on the hood above the snorkel/diverter...

I have yet to see anyone else do a cold air intake the way I did. It you are pulling air from under the hood it is NOT a cold-air intake. The way I tackled the cold air intake issue was to trim down the front grill over the passenger side headlight making and intake in the front of the KJ...

I used the sandwich between-the-grille-and-inserts method years ago. The original inserts have been on my KJ since 2006. I painted them with several coats of flat black Rustoleum and they have lasted well. Coming up on six years later they do have some paint chips but not much. I wanted...

I just used several coasts of heavy speckled spray on bedliner. It has lasted years and only hs become chipped in the last year or so since I began putting baby strollers up on top of it. Some of the sharp edges on our Bob stroller have managed to chip it in a couple of places. I think you...

I put our strollers on top and use bungie cords to strap them on. The under part of mine is full of tools and roadside emergency kit. One of our strollers is a BOB and fits up top with no problems. If there were no junk it would fit underneath as well. I used metal as it is stiff and...

They come out really quickly. You can see the version I built over 5 years ago where I used a textured paint instead of cloth for a covering. It has held up for just over 5 years now w/o much wear and tear. I used the back cargo shelf all the time. Look about 1/2 way down page two of my...

I wonder if it is the paint you used? Or maybe the gutter material was oily? I have not had to re-paint mine since I put them in years ago. I do have pings and some chips due to rocks etc. but they are nothing major. We have lots of stuff out here to get hit by to say the least. Lets just...

It kind of sounds like it is only controlling the voltage as standard external voltage regulator would in an old car. The amperage output, from the description, does not sound like it is being managed. From my limited, non engineer standpoint of electrical control, you would need some pretty...

I don't think that is the case. The KJ alternator only has two connections. One is the main output which goes directly to the battery and the other is a two-wire connector as in any standard 3-wire alternator that I believe goes to the ignition switch and indicator based on the wiring diagrams...

@kbOnly So have you done any night wheeling with all your lights on since you did the dual battery setup? I have 400w of lights on top and notice if I have all of them on with my headlights and fog lights there appears to be some slight dimming of my lights after about 1.5 hours of...

That stuff was what the term 'gumbo' is suppsed to be. Thick! John ];')

All that is is a <$10 roll of rain gutter mesh. A roll can do 3-4 Jeeps - possibly more. I did this mod years ago. No attachment wire needed. I just sandwiched the gutter screen (cut larger than the opening) between the outer and inner grille sections to form the shape, removed the gutter...

For me the only really noticeable mpg improvement came when I checked which settings of the air handling system that cause the AC compressor to come on and made the attempt try to keep it off. Keep the compressor from running (if it is not too hot or you can do w/o th AC) and you will see...

Joel was the only one to get stuck. The other two went around the deep part of the mud. Lot of suction in that deep spot. John ];')

My wheelng vids can be seen on my YouTube page here http://www.youtube.com/user/kugellagers Not all that exciting but wheeling vids they are. John ];')

Definitely want to make sure you seal the heck out of it to prevent water from getting in. I used some of that spray foam insulation and then painted over it. Simple but effective. Rust is bad. John ];')

Hey I finally got my butt in gear and registered over here. Been on LOST Jeeps for years. Cheers John ];')