Search results

My '06 has about 44K on it. The front rotors have been fine, but the rears were terrible. The right side rear rotor was scored over and over and had a large groove all around that I could defintiely feel by just running my finger over the thing.

Thank you for the replies. I finally got them done about an hour ago. The e brake really held the rotors on the hub. I wasn't sure if i should continue pulling or not. I finally got it done. I love this site. Saved me a ton so far.

Thanks for the link. Do I have to take the car out of park when replacing the rear rotors?

I tried searching for this and really didn't find anything. I'm trying to replace the rear brakes and rotors on my 06 Liberty. I've got the caliper off now and i cannot get the rotor off. It is loose but will not come off. Was I supposed to take off the parking brake? This is the first...

When I installed the '04 EVIC in my '06, because I wanted the temp readout, titan was a huge help. Any info I needed on wiring/ pinouts, he knew. All of this information is in the EVIC thread.

I just installed this exact part in my 06 KJ. I can tell you install was pretty straight-forward. Everything works, including temperature and TPMS.

Yes, thanks to all the help I got on the forums.

I will try. I guess I am always worried about screwing something up. edit: You were right.

So I have the courtesy lamp load shed and the fused B+ connected. I have nothing going to the ground or the courtesy lamp driver wires. The dome lights only work when I press the lens. The lights don't light by the dimmer switch or by opening the doors. Is there another wire to splice, or do...

Answer to the dome lights question, courtesy of the_titan: 2004: 1 M1 20PK FUSED B(+) 2 M2 20YL COURTESY LAMP DRIVER 3 M20 20BR COURTESY LAMP LOAD SHED 2006: 1 M20 20YL/LB COURTESY LAMP LOAD SHED 2 A908 20RD FUSED B(+) 3 Z327 20BK/WT GROUND __________________

Thanks titan. When I posted this, I was thinking, "I hope the titan reads this." As I continue my install, I think I have one final question. When I plugged in the courtesy lights, the lights stayed on with the doors closed. I read another thread where the wires were reversed. The wires...

Sunroof pinouts for 2006 Liberty Just received an EVIC from a 2004 Liberty. I did read through the other posts and I have a question that really didn't get answered in the other threads. I did a test run, and everything looked good. The only problem I have is that the sunroof wiring harness...

I actually purchased the EVIC on eBay for $211 after reading through all the posts on every KJ board that I could find. It seems like a pretty easy install, so I pulled the trigger. I didn't really expect the auction to go that high, but I really wanted the EVIC.

Kind of OT but didn't want to start a new thread... I have a 2006 Liberty Sport that I am looking to install an EVIC in. This is my first post, but I have read countless threads providing great info on this subject. In one particular thread I read that in order to have a temperature...